Rigging-Busters provides factory and plant relocation services in Hamilton, Ontario, for steel processors, fabricators, food plants and other manufacturers. Our riggers, machinery movers and millwrights take machines out of the old building, haul them across the city or across Ontario, and set them in place and level them at the new plant.
Plant relocations in Hamilton can be a change of address inside the city, from an older building in the lower city to a business park on the Mountain or in Stoney Creek, or a move to Burlington, Brantford or Niagara. We plan the route, the permits and the shutdown together.
- Industrial only: machinery and production equipment, not household or office moves.
- One crew: rigging, transport, set-in-place, levelling and millwright installation.
- Fast replies: quotes within 2–4 business hours; estimates are free.
- Where: all of Hamilton, from the Bayfront to Flamborough, plus Burlington, Grimsby, St. Catharines, Brantford, Guelph and the rest of Ontario (see the service area).
Use our Heavy Lifting & Moving Calculator for a rough price range before the walk-through.
or give a call +1-647-846-5179
Planning a Factory & Plant Relocation in Hamilton
A factory relocation is planned backwards from the day the first machine has to run in the new building. We work closely with you on a factory and plant relocation checklist that fits your plant, then follow these steps.
Seven Steps From Walk-Through to Restart
- Walk-through of both buildings: machines, weights, utilities, doors, docks, floor slabs and any pits or foundations at the new site.
- Move order: the line or machine you need first is scheduled first, around your shutdown and stock build.
- Permits and route: City of Hamilton and MTO permits for oversize loads, and any regional permit beyond the city line.
- Disconnects: your licensed electricians disconnect and lock out power, and your trades cap air, water and process lines; we label every machine and cable run.
- Rig-out and loading: skates, hydraulic gantries, jack-and-roll or heavy-capacity forklifts, depending on weight and access.
- Transport or storage: trailers matched to each load, or storage until the receiving plant is ready.
- Set-in-place and levelling: our millwrights position, level and anchor each machine, ready for your electricians and the OEM to reconnect and restart.
or give a call +1-647-846-5179
Customized Plant Relocation Services Across Hamilton’s Business Parks
Every Industrial Plant Relocation Is Different
Every industrial plant relocation has its own requirements. Whether you are moving a manufacturing facility or an entire industrial plant, we plan around what is actually on your floor: a steel processor’s coil handling equipment is not packed like a bakery line, and a machine shop moves differently from a plastics plant.
Moving Between the Bayfront and the Mountain
Hamilton’s industrial land is split by the Niagara Escarpment. The Bayfront Industrial Area in the north end covers about 3,700 acres along the harbour, while the Red Hill North and Red Hill South business parks, about 1,552 acres, sit on the Mountain where the Lincoln Alexander and Red Hill Valley parkways meet (figures from Invest in Hamilton). A move between them climbs the escarpment, so we choose the route for the heaviest load first and plan the other loads around it.
Partial Moves and Line Transfers
Not every relocation empties a plant. Some move one line into a second building, consolidate two Hamilton sites, or send part of a plant to a sister site elsewhere in Ontario. A single machine relocation, from one bay to another or across town, is planned the same way, just with fewer steps. Need a lift or skid only? See our industrial rigging services in Hamilton.
or give a call +1-647-846-5179
Value-for-Money Factory Relocation Services: Pricing a Hamilton Plant Move
We price each plant move as a project after the walk-through and itemise it, so you can see where the money goes. When you compare us with another plant moving company, ask both for the same scope, from rig-out to levelled machines, so the quotes line up.
What Sets the Price
- The machines: how many, how heavy, and how many must be dismantled for transport
- Both buildings: doors, docks, headroom, pits and floor capacity
- Method: skates, gantries, jack-and-roll, forklifts, or a crane lift with our crane or a partner crane (crane time is included in your quote)
- Permit category: City of Hamilton single-trip permits are graded by weight (under 70,000 kg, under 120,000 kg, and superloads of 120,000 kg or more), and overweight loads can take longer to review
- Distance: across Hamilton, or on to Burlington, Brantford, Niagara or the GTA
- Timing: shutdown weekends, phased moves and storage between buildings
or give a call +1-647-846-5179
Expert Industrial Relocation Services for Steel, Food and Manufacturing Plants
Industrial relocation brings its own challenges in Hamilton, from heavy steel-plant equipment to sanitary food lines. There are no one-size industrial relocation solutions, so we match the method to each machine and the building it sits in.
What We Relocate in Hamilton Plants
- Presses, press brakes, shears and heavy fabrication equipment
- CNC machines, machining centres and lathes
- Assembly cells, partial production lines and conveyors
- Food processing and packaging lines
- Printing presses and converting equipment
- Transformers, switchgear and compressors
- Heavy lab equipment (for a laboratory relocation, see lab and medical equipment movers in Hamilton)
Hamilton Industries We Move
The Bayfront Industrial Area, a cornerstone of Ontario’s heavy manufacturing and steel production, employs more than 18,000 people, according to Invest in Hamilton. The Red Hill business parks host employers in life sciences, advanced manufacturing and food processing. We plan relocations for all of them, and for manufacturers in the Stoney Creek, Ancaster and Flamborough business parks.
Factory Decommissioning & Dismantling Services in the Plant You Are Leaving
What Happens at the Old Building
Our factory relocation services include dismantling the existing setup once your trades have disconnected it. Machines are separated from their conveyors, platforms and the overhead equipment that moves with the line, anchor bolts are released, and every part is tagged so the line goes back together at the new plant.
Machines that are not going to the new plant can be removed in the same visit; see industrial plant removal and decommissioning in Hamilton.
or give a call +1-647-846-5179
Factory Installation & Reassembly Services at the Receiving Plant
Levelling, Alignment and the Hand-Off to Your Trades
At the new location our millwrights set each machine on its marked position, level and align it, re-join sections and fit anchors where the layout calls for them. Your licensed electricians reconnect power, as Ontario requires for electrical work done for hire, and the OEM or your maintenance team recommissions controlled equipment. We work to the restart order you set, line by line.
or give a call +1-647-846-5179
Reliable Factory Transport & Rigging Services on Hamilton Roads
How We Rig, Load and Haul
Moving heavy machinery and other equipment is the core of our factory relocation services. Machines are skidded on skates, lifted with hydraulic gantries or jack-and-roll where the building has no overhead crane, loaded with heavy-capacity forklifts, and secured on trailers matched to each load. When a lift needs a crane, we use our crane or a partner crane and plan it with the rest of the move. For a plant moving beyond Hamilton, machinery transport across Ontario shows how each load is chained and blocked to Ontario’s securement standard.
Oversize Load Permits on Hamilton Roads
On City roads, an oversized or overweight truck needs a City of Hamilton oversize permit, and standard applications can take up to five business days. For a plant move with many loads, the City also issues an overload project permit valid for up to six months, which can suit a phased relocation. The Lincoln Alexander and Red Hill Valley parkways are City expressways, so the City permit covers them, while the QEW, Highway 403 and Highway 6 need an MTO permit, applied for at least five business days ahead.
Moving to a new plant in Burlington? Halton Region can limit single-trip moves on its roads to daylight on weekdays, outside 6:30–9 a.m. and 3:30–6 p.m., allows none from December 24 to January 3, and bars loads over 63,500 kg from the eastbound Tansley structure on Dundas Street.
or give a call +1-647-846-5179
Short-Notice and Emergency Factory Relocation in Hamilton
Realistic Lead Times When the Date Is Close
Leases end early, buildings sell and equipment fails, so some plant moves cannot wait. We do not promise round-the-clock crews, but we tell you on the first call what can move quickly: machines within legal dimensions can go as soon as a crew and trailer are free, while an oversize load waits for its City of Hamilton permit, up to five business days, and an MTO permit, applied for at least five business days ahead. Sending the equipment list early is the fastest way to shorten the wait.
or give a call +1-647-846-5179
Service Area: Hamilton’s Business Parks and Nearby Cities
We cover all eight business parks listed by Invest in Hamilton: the Airport Employment Growth District, Ancaster Business Park, the Bayfront Industrial Area, the East Hamilton Industrial Area, Flamborough Business Park, Red Hill Business Park, Stoney Creek Business Park and the West Hamilton Innovation District at McMaster Innovation Park.
Beyond the city line we move plants to and from Burlington and Oakville, Grimsby and St. Catharines, Brantford, Haldimand County, Cambridge and Guelph, and the GTA. Moving a plant elsewhere in the region? See factory and plant relocation in Milton, industrial plant relocation in Mississauga or factory and plant relocation in Toronto.
Nearby Cities for Hamilton Plant Moves
| City | Province | Country |
| Hamilton | ON | Canada |
| Burlington | ON | Canada |
| Oakville | ON | Canada |
| Milton | ON | Canada |
| Brantford | ON | Canada |
| Haldimand | ON | Canada |
| Cambridge | ON | Canada |
| Mississauga | ON | Canada |
| Guelph | ON | Canada |
| Halton Hills | ON | Canada |
| Brampton | ON | Canada |
| St. Catharines | ON | Canada |
| Kitchener | ON | Canada |
| Waterloo | ON | Canada |
| Grimsby | ON | Canada |
or give a call +1-647-846-5179
Why Hamilton Plants Hire Us for Relocations
- Industrial only: plant equipment, not offices or homes.
- Plant movers and millwrights in one crew: the people who rig a machine out also level it at the new plant.
- Permits arranged: City of Hamilton, regional and MTO permits, with escorts when a load needs them.
- Phased moves: sequenced around your shutdowns so lines restart in order.
- Storage when the receiving building is not ready.
- Quick quotes: replies within 2–4 business hours.
- Insured: liability and workers’ compensation insurance (WSIB in Ontario), with a certificate of insurance on request.
A good fit: whole-plant moves, line transfers, consolidations, single machine relocations and commercial factory relocations in Ontario, inside Hamilton or between cities.
Not a fit: office or business relocation, household moves, manufacturing relocation consulting such as site selection, crane rental and equipment repair.
Get a Quote for Your Factory or Plant Relocation
Send These With Your Hamilton Quote Request
The fastest quotes come from complete requests. Send these with your quote request:
- Equipment list: machine names, weights and sizes, with nameplate photos
- Old and new addresses: dock doors, headroom, floor and any pits or foundations
- Layout of the new plant, even a marked-up sketch
- Key dates: last production day, lease end and when the new building is ready
- Your trades: who disconnects and reconnects power, air and process lines
- Extras: crating, storage, anchoring, or machines to remove instead of move
Other Services in Hamilton
See all our services in Hamilton, or go straight to a related service:
- Heavy Equipment & Machinery Movers in Hamilton, ON
- Heavy & Industrial Rigging Services in Hamilton, ON
- Lab & Medical Equipment Movers in Hamilton, ON
- Forklift Moving Service in Hamilton, ON
- CNC Machine Movers in Hamilton, ON
- Electrical Transformer Moving Services in Hamilton, ON
- Industrial Plant Removal & Decommissioning in Hamilton, ON
Location of our sales office:
170 Charlton Ave E, Hamilton, ON L8N 1Y9, Canada
Plant Relocation in Hamilton: Common Questions
We start with a walk-through of both buildings and an equipment list, agree the move order around your shutdown, and apply for City of Hamilton or MTO permits where loads are oversize. Your trades disconnect power and process lines, we rig, load and haul each machine, then our millwrights set, level and anchor it at the new plant for your restart.
A factory relocation moves a plant’s production equipment, and the work around it, from one building to another: planning, dismantling, rigging, transport, reassembly and levelling. In Hamilton it can be as short as a move between two units in the same business park or as long as a haul to a new plant elsewhere in Ontario, and it is planned the same way.
Yes. A machinery move shifts one machine or a few. An industrial plant relocation moves whole lines, so it adds a move sequence, labelling of every connection, phased shutdowns, storage when the new building is late, and coordination with your electricians and the OEM. For a single machine relocation, see our machinery movers in Hamilton.
Yes. We take commercial factory relocations in Ontario between cities as well as inside Hamilton, for example from Hamilton to Burlington, Brantford, Niagara or the GTA. Each road authority on the route issues its own oversize permit, so the plan covers City, regional and MTO permits. Send both addresses with your equipment list and we will plan the route.
Only for oversized or overweight loads. On City roads, including the Lincoln Alexander and Red Hill Valley parkways, the City of Hamilton issues an oversize permit, and standard applications can take up to five business days. The QEW, Highway 403 and Highway 6 need an MTO permit. For many loads over several months, ask about the City project permit.
Yes. A move from the Bayfront or the east end to the Red Hill, airport or other business parks on the Mountain climbs the Niagara Escarpment, so we plan the route for the heaviest load first, book the City permits, and schedule the loads so each line arrives in the order it will restart. Send both addresses and the equipment list.
Each plant move is priced as a project after a walk-through. The main factors are the number and weight of machines, how much dismantling they need, access at both buildings, the lifting method, distance, and the permit category for oversize loads. For a single machine, our Heavy Lifting and Moving Calculator gives a rough range, and a full quote follows the walk-through.
They can be removed in the same visit. We rig them out, load them for the buyer, an auction pickup or storage, and leave the floor clear for the hand-back. See industrial plant removal and decommissioning in Hamilton for how that works, and list the surplus machines in your quote request.
No. Office, business and household moves suit a commercial or residential mover. We relocate industrial plants and production equipment only, such as presses, CNC machines, food lines and fabrication equipment. Heavy lab equipment is handled by our lab and medical equipment movers in Hamilton, and anything else industrial starts with a quote request.
