Heavy forklift moving a CNC machining centre across a yard

Looking for machinery movers in Sherbrooke? Rigging-Busters moves industrial machines across Sherbrooke and the Eastern Townships (Estrie). Our riggers get each machine out of the building, load it, truck it under the right permits and position it on its new spot.

We work for manufacturers, machine shops, printers and buyers of used equipment. This page also covers our rigging, CNC, forklift transport and plant relocation work in the Sherbrooke area.

  • Industrial jobs only: machines, production lines and plant equipment. No household or office moves.
  • One crew for the whole job: rigging, loading, transport, set-in-place, levelling and millwright installation under one plan.
  • 3,500 CAD minimum per project, before tax: most industrial moves cost more, and the quote spells out what is covered.
  • Free estimates: we usually reply within 2–4 working hours once we have all the details.
  • Insured: $5 million in liability insurance that includes cargo coverage, plus workers’ compensation coverage, with a certificate of insurance on request.

Our online Heavy Lifting & Moving Calculator shows a rough price range before you call.

or give a call +1–438-239-1237


Machinery Moving in Sherbrooke, Step by Step

Whether it is one machine or a full plant, the job follows this order:

  1. Details: you send the machine list with weights, dimensions, photos, both addresses and the target date.
  2. Site visit if needed: we check doors, docks, floor strength, headroom and where a trailer can park.
  3. Plan: lifting method, trailer, route, permits and escorts, all planned before the move date.
  4. Rigging and loading: skates, jacks, a hydraulic gantry or a heavy forklift, with a crane only when the lift needs one. Chains and blocking secure the load for the road.
  5. Placement and levelling: the machine lands on its marked spot and is levelled, ready for reconnection and start-up, with millwright installation if you need it.
Forklift loading a machine onto a trailer in a warehouse
Machine loaded onto a trailer in a warehouse
CNC machine and control cabinet on machinery skates
CNC machine and control cabinet set on machinery skates

Millwright Installation and Levelling

Our millwrights place each machine on its pads or anchors, level and align it, and leave it ready for your licensed electricians to reconnect. We set anchor bolts, base plates and shims to the OEM’s foundation drawing and torque them once the machine is level. Machines too big to travel whole are taken apart at the old site and rebuilt at the new one.

Estimates are free: describe the machines and attach a few photos to your request.

or give a call +1–438-239-1237


What We Move in the Eastern Townships

Typical loads:

  • CNC machines, machining centres, lathes and grinders
  • injection moulding machines, presses and press brakes
  • conveyors, packaging equipment and whole production lines when a plant relocates
  • printing presses, which travel unit by unit after your team or the manufacturer disconnects them
  • transformers, switchgear, compressors and generators
  • forklifts, hauled on a lowboy trailer: we move them, but we don’t rent, sell or repair them

Auctions, Closures and Consolidations

Estrie’s industry is moving in both directions. Sherbrooke has about 360 manufacturers, yet real manufacturing GDP in the Sherbrooke area fell 3.7% in 2025. In 2026, a plastics and rubber maker announced C$63 million for equipment and plant expansions in Sherbrooke and Magog.

Elsewhere, a furniture maker ended production in Coaticook, and another one’s relaunch left its Sherbrooke plant out. Footwear production moved from Lac-Drolet to Sherbrooke. These are regional news items, not our projects.

At some auctioneers, heavy lots must leave within about 5 days, by appointment. Give us the lot number, pickup address and deadline; the rigging and trucking are scheduled to meet it.

Press brake on machinery skates inside a fabrication shop
Press brake set on skates for a move inside the shop
Industrial forklift loaded on a lowboy trailer for transport
Forklift on a lowboy trailer, ready for the road

Moving a CNC machine, a press or a forklift? Put the model and weight in your request.

or give a call +1–438-239-1237


Permits, Spring Thaw and Cross-Border Moves

Trailer choice depends on the machine. A low machine rides on a flatbed, and a tall one goes on a lowboy to stay within height limits. A tilt-deck trailer can load a press brake without a crane. Sherbrooke is about 150 km from Montreal by Autoroute 10, and crew travel is built into your quote.

Quebec Oversize Permits and Escorts

Quebec’s transport ministry (MTMD) issues a special permit (French) for any load beyond the legal size or weight. Carriers apply in its GPM system. In 2026, fees run C$141 per specific permit in classes 1–3 and C$305 in classes 4–7. Classes 6 and 7 need a ministry feasibility study first, so plan a few weeks ahead. Past 3.75 m of width on a road with more than one lane in the direction of travel, an escort vehicle follows the load. Past 4.5 m of height, one leads it.

Spring Thaw and City Permits

Sherbrooke lies in thaw zone 1. In 2026 its thaw period (French) ran from 16 March to 15 May. Axle limits drop then, and most overweight special permits are put on hold, so heavy hauls go more smoothly outside that window. In town, work that spills onto the street needs a street occupation request (French) to the City of Sherbrooke, for example when a crane or trailer takes a lane. The City wants the request at least 10 business days ahead. Some cities add a permit of their own. In Montreal, each borough on the route requires one over 2.6 m wide or 4.15 m high. It is also required over 50 t when the haul needs a class 6 or 7 permit.

Moves to Ontario or the US

Estrie borders Vermont and New Hampshire to the south and Maine to the east. Near Stanstead, Autoroute 55 meets Interstate 91. Each province or state on the route issues its own oversize permits, Ontario and Vermont included, and these are planned with the route. Your customs broker handles the customs paperwork, and the haul is scheduled around the broker’s documents.

Engine lathe lifted with slings and a forklift in a workshop
Engine lathe lifted on slings with a forklift

Oversize load or a border crossing ahead? Send the dimensions, the route and your date.

or give a call +1–438-239-1237


Service Area: Sherbrooke and the Eastern Townships

In Sherbrooke, we work in the Parc industriel régional, the Parc scientifique de Sherbrooke, the Technoparc and the Fleurimont and Lennoxville industrial parks. In 2024 only 4% of the city’s industrial land was still free, so a growing plant may have to change buildings.

Around Sherbrooke, we serve Magog, Coaticook, Windsor, East Angus, Val-des-Sources and the other towns in the table below. For Granby or Drummondville, see industrial moves in Drummondville, Saint-Hyacinthe and Granby (in French).

Towns We Serve Around Sherbrooke

CityProvinceCountry
SherbrookeQuebecCanada
Ayer’s CliffQuebecCanada
CoaticookQuebecCanada
ComptonQuebecCanada
Cookshire-EatonQuebecCanada
East AngusQuebecCanada
MagogQuebecCanada
Mont-DufresneQuebecCanada
North HatleyQuebecCanada
Val-des-SourcesQuebecCanada
ValcourtQuebecCanada
WatervilleQuebecCanada
WindsorQuebecCanada

Plant in Magog, Windsor or Coaticook? Add the exact address and site access to your request.

or give a call +1–438-239-1237


Pricing a Machinery Move in Sherbrooke

Each quote is built from the job’s details:

  • Machines: how many, how heavy, how large
  • Access: doors, docks, stairs and floor capacity at both sites
  • Method: heavy forklift, hydraulic gantry, jacks and skates, or a crane
  • Route: distance, crew travel, permits, escorts and trailer type
  • Schedule: shutdown dates, after-hours or weekend work, thaw restrictions

Projects start at 3,500 CAD, and most industrial moves cost more. Our pricing page explains how a quote is put together.


Your Quote Checklist

Include these and the first quote can be exact:

  1. Machine list: make, model, weight and dimensions
  2. Photos: each machine and its way out of the building
  3. Addresses: pickup and delivery, with an on-site contact at each
  4. Access: doors or docks, headroom, floor condition
  5. Dates: shutdown window or auction removal deadline
  6. Site rules: the safety requirements and documents your site asks for
  7. Border details: your customs broker’s contact, if the machine leaves Canada

More Services in Quebec

The full list is on our page for all our services in Quebec. Related pages:

  1. En français : transport de machinerie lourde et déménagement industriel à Sherbrooke
  2. Déménagement de laboratoire et matériel médical à Sherbrooke (in French)
  3. Machinery & industrial movers in Montreal
  4. Industrial rigging services & riggers in Montreal
  5. Factory & plant relocation in Montreal
  6. Lab & medical equipment movers in Montreal

Location of our sales office:

41 Rue King O, Sherbrooke, QC J1H 1P1, Canada


Sherbrooke Machinery Moving: Common Questions

How much does machinery moving cost in Sherbrooke?

It depends on the machines, their weight and size, site access, the lifting method, distance, permits and timing. Projects start at 3,500 CAD; most industrial moves cost more. A machine list with photos helps us quote accurately, and we usually reply within 2–4 working hours once we have all the details.

When does a machine need an oversize permit in Quebec?

Once it is wider, taller or heavier than the legal limits. The MTMD special permit is requested in the GPM system and costs C$141 in classes 1–3 or C$305 in classes 4–7 in 2026. Classes 6 and 7 add a feasibility study that takes weeks.

Can machinery be moved during the spring thaw in Sherbrooke?

Yes, with limits. Sherbrooke is in zone 1, where the 2026 thaw ran from 16 March to 15 May. Axle limits drop and most overweight special permits are put on hold, so book heavy hauls for the months outside that window.

Is travel to Sherbrooke charged extra?

Sherbrooke is about 150 km from Montreal by Autoroute 10. Crew and equipment travel is built into the written quote, so you see the full price before you book.

Which towns around Sherbrooke do you serve?

Sherbrooke and its industrial parks, Magog, Coaticook, Windsor, East Angus, Val-des-Sources and the other towns in the table above. For Granby or Drummondville, tell us about the project in your request.

Can you pick up machines from an auction or a plant closure?

Yes. Auction lots often have to leave within about 5 days. Send the lot number, address, deadline and destination, and the rigging, loading and trucking are planned to meet it.

Do you move machines to Ontario or the US?

Yes. Each province or state on the route has its own oversize permit rules, planned with the route. Customs paperwork is your customs broker’s job; the haul is scheduled around the broker’s documents.

Do you also install, level and align machines?

Yes. Our millwrights place each machine on its pads or anchors, level and align it, and leave it ready for your licensed electricians to reconnect.

Can we rent a forklift or a crane from you?

No. We don’t rent forklifts or cranes, with or without an operator. We move forklifts like any other machine, without selling or repairing them. A crane may still be included in a lift we plan.

or give a call +1–438-239-1237