Rigging-Busters moves CNC machines for machine shops, auto-parts plants and other manufacturers in Guelph, Ontario and across Wellington County. Our CNC machine movers take on the heavy part of the job: the lift off the floor, the trailer and the route, and setting the machine down level at its new spot, whether that is across the aisle or across the province.
For a machine shop owner, every day a machine sits on skates is a day of lost spindle time. That is why each Guelph move is scheduled backwards from the restart date: control backup and coolant drain first, then your licensed electricians disconnect the power, then our crew rigs and hauls, and the OEM technician arrives to recommission.
- What we take on: CNC machines, machining centres and the plant equipment around them. Industrial jobs only, so no house, apartment or office moves.
- Small to large: from one small CNC lathe or a toolroom mill to a complete machining cell.
- Start to finish: rigging, transport, set-in-place, levelling and millwright installation, done by one crew.
- Quotes: estimates are free, and you get an answer within 2–4 business hours.
- Service area for our CNC movers: Guelph, Ontario, Wellington County (Puslinch, Rockwood, Fergus and Elora), Acton and Milton, plus Kitchener-Waterloo and Cambridge (see the full service area).
Want a ballpark before you call? Try our Heavy Lifting & Moving Calculator for an instant price range.
or give a call +1-647-846-5179
Moving one machine or a whole production line? Our industrial machine and heavy equipment movers size the crew, the gear and the trailer to the job, so a small lathe isn’t over-planned and a large machining cell isn’t under-equipped.
Questions about permits, timing or price? The FAQ at the bottom of this page answers the common ones.
Comprehensive CNC Machine Moving Services in Guelph
Each part of a CNC machine moving job can be booked on its own or together with the rest.
CNC Machine Relocation
Our CNC machine relocation service handles in-plant shuffles, moves between units on the same street and moves across town, for example from the Northwest Industrial Park to the Hanlon Creek Business Park.
Before anything moves, we walk the route with your maintenance lead: door openings, floor joints and trench covers, the slab at the new footprint, and where a forklift or gantry can stand.
CNC Machine Transport
As a CNC machine transportation company, we match the trailer to the machine: a tilt-deck for machines that can roll on, a lowboy for tall ones. Every machine travels locked down, blocked, chained and wrapped against road spray.
From Guelph, the usual routes are the Hanlon Expressway (Highway 6) south to Highway 401, or Highway 7 toward Kitchener. Longer CNC transport, to the GTA, Northern Ontario or across the border to US plants, is planned and quoted the same way.
CNC Machine Installation
Our CNC machine installation work starts where the haul ends: the machine goes onto its levelling pads or anchors, our millwrights rough-level it, and your licensed electricians reconnect the power.
The OEM technician then recommissions the control and makes the final level and geometry checks.
Customized Moving Solutions
No two Guelph plants schedule a move the same way, so customized moving solutions are the norm: a cell moved in phases so half of it keeps running, an old machine out and its replacement in on one shutdown day, or storage while a new building is finished.
or give a call +1-647-846-5179
How We Move a CNC Machine in Guelph
A CNC move falls into three stages, and each stage has a clear owner: your shop and the OEM before move day, our crew on the day, and everyone together at the new footprint.
Before Move Day: Your Shop and the OEM
- Save the control data: your team or the OEM backs up the parameters, part programs, tool tables and work offsets.
- Drain and clear: the coolant is drained and the sump and chip conveyor cleaned out; tooling, vises and fixtures come off, and hydraulic and lube units are prepared as the OEM’s transport instructions say.
- Disconnect: your licensed electricians disconnect and lock out the power, and your maintenance team disconnects the air and coolant lines.
- Book the restart: the OEM technician who will recommission the machine, ideally for the day after delivery.
Move Day: Lock-Down, Lift and Load
Our crew fits the shipping brackets or locks each axis, and secures the spindle head, table or turret so nothing can drift on the road. Then the machine comes up: toe jacks under the base, then machinery skates, a hydraulic gantry, or a heavy-capacity forklift if the frame has fork pockets. Tall boring mills and big lathes can go up in stages on jack-and-roll. When only a lift from above will do, the plan uses our crane or a licensed partner crane.
Permits and Timing on Guelph Roads
Most single CNC machines travel within the legal size limits and need no oversize permits. A wide, tall or heavy load does, and in Guelph the rules shape the schedule:
- The City of Guelph oversized vehicle permit comes from Transportation Services; the application goes in at least five business days before the move.
- Permit loads travel in daylight only, never between 7 and 9 a.m. or 4 and 6 p.m., and not on Saturdays, Sundays or statutory holidays.
- A Guelph Police escort is needed for loads wider than 3.65 m on two-lane roads or 4.80 m on four-lane roads, or taller than 4.80 m, and it has to be booked at least seven days ahead.
- Loads taller than 4.15 m also need Guelph Hydro, Bell and Rogers notified before the move.
- Wellington County roads need a County permit with 10 business days’ notice, and loads 3.5 m or wider are kept out of the Wellington Road 109 bridge work between Highway 6 and Wellington Road 16 while it runs through 2028.
- The Hanlon Expressway, Highway 7 and Highway 401 are provincial roads, covered by an MTO permit.
We apply for the permits and book any escort, and the dates go into your quote.
At the New Footprint: Setting, Levelling and OEM Restart
The machine is set on its pads or anchors and rough-levelled by our millwrights. Your electricians reconnect the power, the OEM technician recommissions the control and runs the final level and geometry checks, and production restarts. A new slab can settle in its first weeks, so plan a re-levelling check after the machine has run for a while.
CNC Machines We Move in Guelph
Our crew moves the machine tools found in Guelph job shops and production plants, and as large equipment movers we bring the support equipment along too:
- Vertical machining centres, horizontal machining centres with pallet changers, and 5-axis machines
- CNC lathes, Swiss-type lathes and turning centres with bar feeders
- Surface and cylindrical grinders, wire and sinker EDMs, and CMMs
- Fibre laser and waterjet tables, press brakes and turret punches
- Toolroom mills and lathes, compressors, chillers and coolant systems
Guelph’s Manufacturing Base
Manufacturing accounts for 25% of Guelph’s employment, according to the City’s 2020 Employment Lands Strategy, and auto parts is the most significant part of it. Linamar, which mainly makes auto parts, is the city’s largest private employer, and Invest Ontario describes a Linamar program of more than CAD 1 billion, across six projects, to expand and retool its Ontario facilities. The City’s community profile counts close to 16,000 residents working in advanced manufacturing and names Polycon, DENSO, Blount Canada, Hammond Manufacturing and Guelph Manufacturing Group alongside Linamar.
Behind them sits a dense supplier base: the Ontario Machining Network lists 50 machine shops and fabricators in Guelph, 36 of them offering CNC machining and 9 tool and die work.
Machine Swaps, Retooling and Used Machines
When a line is retooled, the old machines have to come out before the new ones go in. We can pull the outgoing machines, hold them in storage or deliver them to a buyer, then set the replacements, all in one shutdown window. For a full line or building move, see our factory and plant relocation in Guelph.
Bought a used CNC machine from a dealer or another shop? Send the seller’s address, the pickup window and the machine model, and we will rig it out and deliver it to your floor.
Why Guelph Shops Choose Us for CNC Machine Moving
Rigging-Busters is an industrial moving company. Our CNC movers spend their days on machine tools and plant equipment, so every job starts with the machine’s weight, centre of gravity and lifting points.
Shops looking for a CNC moving company usually ask three things: who is responsible for what, when the machine will run again, and what the permits allow. The plan answers all three in writing.
- Good fit: single CNC machines, machining cells, toolroom moves, dealer deliveries, used-machine pickups and machine swaps during a retool.
- Not a fit: house, apartment and office moves (a residential mover, or one of the Guelph commercial movers that handle offices, is the right call), CNC machining or part orders, machine repair, CNC operator jobs, used-machine sales, and crane or equipment rental.
Need a lift without the move, such as setting a machine that arrives on your own truck? See our industrial rigging services in Guelph.
or give a call +1-647-846-5179
CNC Machine Moving Cost in Guelph: What Changes the Price
A CNC move is priced from the job itself, not from a rate card. These are the things that change the number:
- The machine: weight, footprint and height, and whether it ships whole or in sections
- The buildings: dock or grade-level door, door width, aisle turns and floor loading at both ends
- The lift: toe jacks and skates, a gantry, a forklift, jack-and-roll or a crane lift (crane time is included in your quote)
- The road: distance, permits, and whether a Guelph Police escort is needed
- The clock: City permit loads move only in daylight on weekdays and outside rush hours, so an oversize move is planned around those windows
- The finish: levelling, anchoring and millwright time
Your own preparation lowers the price: a machine that is backed up, drained and cleared when the crew arrives takes fewer crew hours. For an instant range, use the Heavy Lifting & Moving Calculator.
Contact Rigging-Busters Today
Ready to move a CNC machine in Guelph? Ask for a free quote, and you will hear back within 2–4 business hours.
What to Send for an Exact Quote
Send a quote request with these details:
- Machine make, model and weight (a photo of the nameplate is enough)
- Both addresses, with door sizes and whether there is a dock
- Photos of the machine and of the path to the door
- Your target date or shutdown window
- Anything else that moves with it: tooling cabinets, chillers, conveyors
- Whether you need storage, installation or an old machine taken out
Let Us Handle Your CNC Machine Moving Needs
Hand us the lifting, the hauling and the setting. Your team keeps charge of the backup and the power, the OEM handles the restart, and our CNC machine movers in Guelph take care of everything between the old floor and the new one.
All quotes are in Canadian dollars.
Get in touch to get started on your next CNC machine move.
or give a call +1-647-846-5179
Service Area: Guelph, Wellington County and Nearby
Inside Guelph we work in every employment area: the Hanlon Business Park and Hanlon Creek Business Park along Highway 6 near the 401, the Northwest Industrial Park, the York-Watson Industrial Park and the South Guelph industrial lands. Around the city we cover Wellington County (Puslinch and Aberfoyle, Rockwood in Guelph/Eramosa, Fergus and Elora in Centre Wellington, and Erin), Acton in Halton Hills, Milton, and Waterloo Region from Elmira and New Hamburg to Kitchener, Waterloo and Cambridge. Nearby CNC pages: CNC and machine tool movers in Kitchener-Waterloo, CNC machine movers in Milton and CNC machine movers in Brantford.
Cities and Towns We Cover from Guelph
| City | Province | Country |
|---|---|---|
| Guelph | Ontario | Canada |
| Acton | Ontario | Canada |
| Ayr | Ontario | Canada |
| Brampton | Ontario | Canada |
| Brantford | Ontario | Canada |
| Burlington | Ontario | Canada |
| Cambridge | Ontario | Canada |
| Elmira | Ontario | Canada |
| Elora | Ontario | Canada |
| Fergus | Ontario | Canada |
| Halton Hills | Ontario | Canada |
| Hamilton | Ontario | Canada |
| Kitchener | Ontario | Canada |
| Milton | Ontario | Canada |
| Mississauga | Ontario | Canada |
| New Hamburg | Ontario | Canada |
| Oakville | Ontario | Canada |
| Paris | Ontario | Canada |
| Preston | Ontario | Canada |
| Rockwood | Ontario | Canada |
| Salem | Ontario | Canada |
or give a call +1-647-846-5179
Other Services in Guelph
For presses, production lines and other heavy machinery, our machinery movers in Guelph take on the job, and you can browse all our services in Guelph.
You also might be interested in the following services within the area:
- Heavy Equipment & Machinery Movers in Guelph, ON
- Heavy & Industrial Rigging Services in Guelph, ON
- Factory & Plant Relocation Services in Guelph, ON
- Lab & Medical Equipment Movers in Guelph, ON
- Forklift Moving Service in Guelph, ON
- Printing Press Movers in Guelph, ON
- Electrical Transformer Moving Services in Guelph, ON
Location of our sales office:
130 Silvercreek Pkwy N, Guelph, ON N1H 7Y5, Canada 👇
CNC Machine Moving in Guelph: FAQ
There is no standard price, because every CNC move in Guelph is quoted from the machine and the route. The weight and size, the lifting method, access at both buildings, the distance, and any City, County or MTO permit or police escort all count. Your own preparation lowers the total. For a quick range before you call, try our Heavy Lifting and Moving Calculator.
Three risks matter most: losing alignment, damaging precision parts such as the spindle, ballscrews and way covers, and a restart date that slips. Each one has an answer in the plan: locked axes and a secured spindle, a lift that suits the machine’s frame, careful blocking on the trailer, and dates set for re-levelling and OEM recommissioning at the new site.
An industrial moving company arrives with the gear a machine shop rarely owns, from toe jacks and skates to a hydraulic gantry, plus the trailer and the permits. The move is planned around the machine’s weight and lifting points, one crew is responsible from the old floor to the new one, and your own people stay free to prepare the restart.
Only with a City of Guelph oversized vehicle permit, applied for at least five business days ahead. Permit loads move in daylight, outside 7 to 9 a.m. and 4 to 6 p.m., and never on weekends or statutory holidays. Loads wider than 3.65 m on two-lane roads or 4.80 m on four-lane roads, or taller than 4.80 m, also need a Guelph Police escort booked a week ahead.
Yes. Outside the city, County roads need a Wellington County permit with 10 business days of notice, and it is valid on County roads only. Loads 3.5 m or wider are kept out of the Wellington Road 109 bridge work between Highway 6 and Wellington Road 16 while it runs through 2028. Highways 6, 7 and 401 need an MTO permit. Most single machines need none of these.
Yes. Send the seller’s or dealer’s address, the machine model and weight, the pickup window and any rules the seller has for movers on site. We check the footprint and lifting points, rig the machine out, load it and bring it to your shop, or into storage if your floor is not ready yet. Ask the seller to drain the coolant before pickup day.
Save the control data first: parameters, programs, tool tables and offsets. Drain the coolant, clean out the chips and pull the tooling. Your licensed electricians disconnect and lock out the power, and your maintenance team disconnects the air lines. Clear a path to the door, find the shipping brackets if you still have them, and book the OEM technician for the restart.
Yes. A retool usually means machines going out and others coming in during the same shutdown. We plan the order so the old machine is out before the new one arrives, set the replacements on their pads, and store or deliver the outgoing machines. Whole lines can move in phases so part of production keeps running. For a complete plant move, see our factory and plant relocation in Guelph.
Every Guelph employment area, from the Hanlon business parks to the Northwest and York-Watson industrial parks, plus Wellington County: Puslinch, Rockwood, Fergus, Elora and Erin. We also cover Acton, Milton and Waterloo Region, with CNC transport further afield on request. For machine tools in Kitchener, Waterloo and Cambridge, see our CNC and machine tool movers in Kitchener-Waterloo.
No. We move CNC machines and other industrial equipment; we don’t machine parts, repair machines, hire CNC operators or sell used machines. For a house or an office, a residential mover or one of the Guelph commercial movers is a better fit. If your shop needs a machine moved, installed or taken out anywhere in or around Guelph, ask us for a quote.
