
Rigging-Busters provides industrial rigging services in Edmonton and the Capital Region. Our riggers lift, turn, lower and place heavy equipment in working plants and on open sites: machines, tanks and vessels, transformers and switchgear, structural steel, and process equipment going up to a roof or down into a pit.
We rig for fabricators, plastics, food and chemical plants, hospitals and labs, data centres, utilities’ contractors and equipment dealers from Nisku to the Industrial Heartland.
- Industrial rigging only: plants and sites, never household moves, oilfield rig moves or crane hire on its own.
- One crew, one quote: rigging, lifting, transport, set-in-place and installation.
- Answers usually within 2–4 working hours on quote requests, once we have all the details.
- Minimum job: 3,500 CAD before tax. Most rigging jobs cost more, and your written quote shows the full price.
- Service area: Edmonton, Nisku and Leduc, Acheson, Sherwood Park, Fort Saskatchewan and St. Albert.
or give a call +1-780-652-1812

A lift is only as good as its plan. For each job we write down the load’s weight and balance point, the slings, shackles and spreader bars and their ratings, the ground or floor under every outrigger and jack, and the order of the lift. Cold weather adds its own line: ground conditions, wind and short daylight go into the plan from October to April.
Rigging Jobs We Take On in the Capital Region
- Moving machines into and out of buildings through doors, windows and wall openings
- Vessels and tanks: upending, turning and setting on foundations
- Lifts to roofs, platforms and mezzanines
- Crane lifts through licensed crane partners, including tandem lifts
- Transformers, switchgear and generators onto pads and into electrical rooms
- Setting, levelling and anchoring on new foundations
- Removal of old equipment before new installations
Our Method, Step by Step
- Look at the load and the site, including ground, floors and overhead obstructions.
- Write the lift plan and share it with your safety and production teams.
- Clear approvals: site permits, street-use permits where a crane sits on a road, and a lift window.
- Rig and test-lift a few centimetres before travel.
- Move by gantry, jacks, skates or crane.
- Set on the marks, level, and anchor where specified.
- Hand over to your trades with a clean site.

Crane Lifts and Operator Certification in Alberta
Some loads can only go up by crane. A licensed crane partner supplies the crane and operator and we run the lift inside our rigging plan; we don’t rent cranes on their own. Alberta treats mobile crane, boom truck and tower crane operation as compulsory certification trades, so operators hold a journeyperson certificate or work as registered apprentices under the trade’s rules.
What We Bring
- Hydraulic gantries sized to the lift
- Jack-and-roll systems and toe jacks
- Machinery skates for floors and ramps
- Spreader bars, slings, shackles and chain hoists, each rated for its load
- Crane lifts through licensed partners
or give a call +1-780-652-1812
Transformer and Switchgear Rigging in Edmonton
Electrical equipment is dense, top-heavy and usually must stay upright. We rig transformers, switchgear, generators and UPS units off the truck, jack them onto skates or set them by crane, and place them on the pad or in the electrical room on the marks your electrical contractor gives us. Oil handling, testing and terminations stay with the manufacturer or your licensed electrical contractor.
Substation renewals, data centre construction north of the city and new plants in the Industrial Heartland keep heavy electrical equipment moving in the region. (Market context only: not our projects.)


Rigging Cost in Edmonton
Rigging is priced per job, not per hour. Our minimum job is 3,500 CAD before tax, and most rigging jobs cost more. The quote depends on the load, the height and reach of the lift, whether a crane or tandem lift is needed, ground and access conditions, engineering such as stamped lift plans, and the time window. See prices and the 3,500 CAD minimum.
Where We Rig
Edmonton’s industrial districts and the Capital Region: Nisku and Leduc, Acheson and Parkland County, Sherwood Park and Strathcona County, Fort Saskatchewan and the Industrial Heartland, and St. Albert. When the whole machine has to move, see machinery movers in Edmonton; in the Calgary region, see industrial rigging services in Calgary.
Why Edmonton Sites Call Our Riggers
- Heavy and awkward loads are the job, not furniture and not oilfield rigs.
- The crew that rigs it also moves, sets and levels it.
- Gantries, jacks, skates and crane lifts through licensed partners.
- Lift windows planned around production and the weather.
- Quick replies: quotes usually within 2–4 working hours once we have all the details.
- Equipment: jack-and-roll systems for loads up to 600 tons, hydraulic gantries, lift trucks up to 60,000 lb and float trailers for loads up to 50 tons.
- Insured: $5 million in liability insurance that includes cargo coverage, plus workers’ compensation coverage (WCB-Alberta in Alberta). Certificate of insurance and WCB-Alberta clearance letter on request.
Have These Ready for a Rigging Quote
Include these in your quote request:
- The load: type, weight, dimensions, photos or drawings.
- The lift path: start and end points, heights and obstacles.
- Ground and access: floors, yard surface, crane set-up space.
- The window: shutdown dates or delivery day.
- Site paperwork: WCB-Alberta clearance letter, insurance certificate, orientation, permits or union labour.
Other Services in Edmonton
More services for Edmonton plants (every service is listed on our Edmonton page):
- Machinery movers in Edmonton
- Forklift transport and moving in Edmonton
- CNC machine movers in Edmonton
- Lab and medical equipment movers in Edmonton
- Industrial rigging services in Calgary
Location of our sales office:
6005 Gateway Blvd NW, Edmonton, AB T6H 2H3, Canada
Industrial Rigging in Edmonton: FAQ
Industrial rigging is the planned lifting and moving of heavy equipment: machines, tanks, transformers and structural pieces. Riggers calculate weights and rigging, choose gantries, jacks, skates or a crane, and place the load on its final marks. In Edmonton our crew also levels and installs what it rigs.
We quote each rigging job as a whole rather than by the hour, with a minimum of 3,500 CAD before tax. The price depends on the load, the lift height and reach, crane needs, ground and access conditions, engineering and timing. Send photos or drawings for a written quote.
Yes, as part of a rigging job. A licensed crane partner supplies the crane and certificated operator, and we plan and run the lift: rigging, signals, set-down and levelling. We do not rent cranes on their own, and every crane lift has a written plan agreed with your site.
Mobile crane, boom truck and tower crane operation are compulsory certification trades in Alberta. An operator must hold a journeyperson certificate or work as a registered apprentice under the trade rules. Our crane partners supply operators who meet these requirements.
Yes, for every job. The plan sets out the weight, balance point, rigging and ratings, equipment, crew and the order of the lift, and adds ground and weather notes in winter. Ask in your quote request if your site needs a stamped engineered lift plan.
Yes. We rig transformers, switchgear, generators and UPS units off the truck and onto skates or by crane, then set them on the pad or in the electrical room on the electrical contractor’s marks. Oil handling, testing and terminations remain with the manufacturer or your licensed electrician.
Yes. Edmonton jobs run all year. In winter we plan for frozen or soft ground under outriggers, wind limits for crane lifts, cold-weather effects on hydraulics and short daylight, and we build those limits into the lift plan and the schedule.
No. We do not move drilling or service rigs or haul oilfield equipment. We do rig plant equipment for manufacturers and fabricators, including shops building equipment for the energy sector, inside their buildings and between their sites.
Yes. Shutdowns, nights and weekends are common for rigging jobs so that production keeps going. Tell us your window in the quote request and we plan the crew, equipment and any crane around it; the quote shows any off-hours cost.
Edmonton and the Capital Region, including Nisku and Leduc, Acheson and Parkland County, Sherwood Park and Strathcona County, Fort Saskatchewan and the Industrial Heartland, and St. Albert. Jobs further out, such as Red Deer, are quoted with travel included.
