
Rigging-Busters moves CNC machines for machine shops and plants in Edmonton, Nisku, Acheson, Sherwood Park and the rest of the Capital Region. Our CNC machine movers work from the manufacturer’s manual with your team: the machine is prepared, rigged out at its lifting points, hauled upright, set on its new pads and levelled for the technician.
Vertical and horizontal machining centres, CNC lathes and turning centres, mills, grinders, routers, plasma tables and EDM machines all move this way, one machine or a whole cell.
- Industrial work only: CNC and shop equipment, never household or office moves.
- One crew, one quote: preparation support, rigging, transport, set-in-place and levelling.
- Answers usually within 2–4 working hours on quote requests, once we have all the details.
- Minimum job: 3,500 CAD before tax. Most CNC moves cost more, and your written quote shows the full price.
- Service area: Edmonton, Nisku and Leduc, Acheson, Sherwood Park, Fort Saskatchewan and St. Albert.
or give a call +1-780-652-1812

The accuracy of a CNC machine lives in its castings, ways and ballscrews. A move that twists the bed or lets an axis drift can cost weeks of recalibration. So the order never changes: manual first, preparation second, rigging third.
Preparing and Moving a CNC Machine
- Manual check: lifting points, shipping brackets, weight and the foundation at the new site.
- Your team or the manufacturer: backs up the control and programs, homes the axes, fits shipping brackets, drains coolant and removes tooling.
- Disconnection by your licensed electrician; air and coolant lines capped.
- Rig-out at the approved lifting points with skates, a gantry or jack-and-roll.
- Transport: wrapped, blocked and chained upright, with cold-weather protection for electronics in winter.
- Placement on your pads or foundation marks.
- Levelling and anchoring by our millwrights, then geometry checks and recalibration by the technician.

Winter Moves and Cold Electronics
An Edmonton winter is hard on a machine that sits on an open deck. We wrap control cabinets and electronics against cold and moisture, limit the time the machine spends outside, and let it come up to shop temperature before the technician powers it up. Spring road bans on county roads can also shape the route for heavy machines going to Nisku, Acheson or Sherwood Park.
Tight Shops, Low Doors and Mezzanines
Older shops in Edmonton’s industrial districts often have a single overhead door and little turning room. We measure every opening, remove guards and chip conveyors where the manual allows, and use low-profile skates and gantries to keep the machine level through the turns. When no door is big enough, our riggers plan a lift through a wall or roof opening with a licensed crane partner.
or give a call +1-780-652-1812
Crating and Long-Distance CNC Moves
Machines leaving the Capital Region, going to storage or crossing to British Columbia are crated or skidded, with axes blocked as the manual specifies and electronics protected against moisture and cold. Routes over the mountain passes are planned around winter conditions and any permit the load needs. In British Columbia, see CNC machine movers in Vancouver.

CNC Moving Cost in Edmonton
Our minimum job is 3,500 CAD before tax, and most CNC moves cost more. The price depends on the machine’s weight and size, what must be removed or crated, access at both shops, the distance and any permit, levelling and anchoring, and the time window. See prices and the 3,500 CAD minimum.
Areas We Cover
Machine shops and plants across Edmonton and the Capital Region: the city’s northwest and southeast industrial districts, Nisku and Leduc, Acheson and Parkland County, Sherwood Park and Strathcona County, Fort Saskatchewan and St. Albert. For a whole shop with presses, fabrication and other equipment, see machinery movers in Edmonton.
Why Edmonton Machine Shops Hire Us
- Manual first: lifting points, brackets and drain steps come from the manufacturer.
- One crew: it rigs, hauls, sets and levels.
- Low-profile skates, gantries and jack-and-roll for small shops.
- Winter-ready: wrapping and timing that protect electronics.
- Quick replies: quotes usually within 2–4 working hours once we have all the details.
- Equipment: jack-and-roll systems for loads up to 600 tons, hydraulic gantries, lift trucks up to 60,000 lb and float trailers for loads up to 50 tons.
- Insured: $5 million in liability insurance that includes cargo coverage, plus workers’ compensation coverage (WCB-Alberta in Alberta). Certificate of insurance and WCB-Alberta clearance letter on request.
Have These Ready for a CNC Quote
Put these in your quote request:
- Make, model and serial plate, or the manufacturer’s spec sheet.
- Manual pages on lifting and shipping, if available.
- Both shops: doors, floors, mezzanines and distance to the truck.
- Who prepares the machine: your team or the manufacturer’s technician.
- Dates: shutdown window and technician booking.
Other Services in Edmonton
More services for Edmonton shops and plants (every service is listed on our Edmonton page):
- Machinery movers in Edmonton
- Industrial rigging services in Edmonton
- Forklift transport and moving in Edmonton
- Lab and medical equipment movers in Edmonton
Location of our sales office:
6005 Gateway Blvd NW, Edmonton, AB T6H 2H3, Canada
CNC Machine Moving in Edmonton: FAQ
By the manufacturer’s manual. The control is backed up, axes are homed and locked with shipping brackets, coolant is drained and tooling removed. The machine is lifted only at the approved points, moved on skates, a gantry or jack-and-roll, kept upright and level, and chained down for transport.
The minimum is 3,500 CAD before tax, and most CNC moves cost more. The price follows the machine’s weight and size, removals and crating, access at both shops, distance and permits, and levelling and anchoring. Send the model and photos and we reply with a written quote.
Back up the control and programs, home the axes, fit the shipping brackets, drain coolant, remove tools and loose parts, and have your licensed electrician disconnect power. If the manufacturer’s technician prepares the machine, book the visit for the day before the move.
We wrap control cabinets and electronics against cold and moisture, keep the time on an open deck short and let the machine reach shop temperature before it is powered up. In spring we also check county road bans for heavy machines going outside the city.
Our millwrights set the machine on its marks, level it and anchor it to the foundation drawings. Accuracy is then checked and restored by the manufacturer’s technician or your own team, who verify the geometry, recalibrate and run test parts before production.
Often, yes. We measure every opening and remove guards, chip conveyors and other parts the manual allows, then use low-profile skates and gantries. If no door is wide or tall enough, our riggers plan a lift through a wall or roof opening with a licensed crane partner.
Yes. Long moves get crating or skidding, blocked axes and protection against moisture and cold, and routes over the mountain passes are planned around winter conditions and permits. Our Vancouver crew handles CNC moves in British Columbia. Each move is quoted with its distance.
Yes. We skid or crate machines, wrap electronics against moisture and block moving parts for storage between sites or for shipping. Let us know how long the machine will be stored and any limits from the manufacturer so we choose the right protection.
Yes. We carry 5 million dollars in liability insurance that includes cargo coverage, plus workers’ compensation coverage with WCB-Alberta. A certificate of insurance and a WCB-Alberta clearance letter are available on request, and the quote states what the coverage applies to.
Edmonton’s industrial districts and the Capital Region, including Nisku and Leduc, Acheson and Parkland County, Sherwood Park and Strathcona County, Fort Saskatchewan and St. Albert. Moves to Red Deer, Calgary or British Columbia are quoted with the distance.
