Long white equipment enclosure carried across a yard by a large yellow lift truck

Rigging-Busters moves industrial machinery and heavy equipment across Edmonton and the Capital Region: Nisku and Leduc, Acheson, Sherwood Park, St. Albert and the plants of the Industrial Heartland. Our machinery movers and riggers rig equipment out, haul it under Alberta permits, set it on its new footprint and level it, whether it is one press, a CNC cell or a plant changing buildings.

Fabrication shops, food and plastics plants, labs and hospitals, data centres and equipment dealers bring us in when a forklift and a deck truck are not enough.

  • Industrial work only: plant, shop and warehouse equipment, never household moves and never oilfield rig moves.
  • One crew, one quote: rigging, trucking, set-in-place, levelling and millwright installation.
  • Answers usually within 2–4 working hours on quote requests, once we have all the details.
  • Minimum job: 3,500 CAD before tax. Most industrial jobs cost more, and your written quote shows the full price.
  • Service area: Edmonton, Nisku and Leduc, Acheson and Spruce Grove, Sherwood Park, Fort Saskatchewan and St. Albert, and on request Red Deer.

Rough budget first? The Heavy Lifting & Moving Calculator gives a range for an Edmonton move.

or give a call +1-780-652-1812

Lathe hanging from yellow slings during an overhead lift in a dim warehouse
A lathe rigged for an overhead lift

Heavy machines punish shortcuts. A tipped lathe or a cracked casting costs more than the whole move, so we start with what the manufacturer and your building tell us: weight and balance point, approved lifting points, slab capacity and the clear width of every door. Only then do we choose between skates, a hydraulic gantry, jack-and-roll and a crane lift by a licensed partner.


How an Edmonton Machine Move Runs

  1. Walk-through: we see both sites, measure openings and ceilings, check floors and the truck approach.
  2. Written plan: weight, rigging, equipment, crew and the order of work.
  3. Isolation: your licensed electricians and plumbers disconnect services; your team or the manufacturer locks moving parts.
  4. Rig-out: the machine rolls or is lifted to the dock without dragging on your floor.
  5. Haul: on a trailer sized to the load, under an Alberta over-dimension permit when the size requires it.
  6. Placement: onto the marks at the new building.
  7. Start-up support: levelling, anchoring and alignment, then your trades reconnect and the machine is recommissioned.
Forklift loading a large wooden crate onto a lowboy trailer
A crated machine going onto a lowboy

Tools of the Job

  • Machinery skates for level rolls across shop floors
  • Hydraulic gantries for indoor lifts without a crane
  • Jack-and-roll systems for the heaviest bases
  • High-capacity lift trucks for yards and docks
  • Lowboy, float and deck trailers chosen per load
  • Crane lifts through licensed partners for loads that must go over or up

Permits, Road Bans and Winter Hauling

Over-dimension loads in Alberta are permitted through the province’s TRAVIS system, which also processes approvals for participating municipalities. We apply once the dimensions are firm and plan the route around bridges, overhead lines and the permit’s travel hours.

Spring brings road bans: while the ground thaws, Alberta restricts weights on listed highways and counties such as Strathcona, Parkland and Leduc post their own bans. Heavy loads headed to a county road may need a lighter configuration, a longer route or a date after the bans lift. In winter we plan for cold-weather loading, ice and short daylight.

Levelling and Millwright Installation

On arrival our millwrights level the machine, anchor it to the drawings and align couplings, shafts and conveyors to the rest of the line. Your licensed electricians reconnect, and your team or the manufacturer’s technician recommissions and recalibrates before production.

White printing and laminating line standing in a plant before it is moved
Long lines are split into sections before they move

or give a call +1-780-652-1812


Machines We Move in the Capital Region

Where Edmonton’s Heavy Equipment Lives

Most heavy plants sit in a few clusters: Nisku and the Leduc business parks near the airport, Acheson west of the city in Parkland County, the industrial areas of Sherwood Park and Strathcona County, and the Industrial Heartland around Fort Saskatchewan. Inside the city, the northwest and southeast industrial districts hold most of the machine shops and food plants.

Loading and Unloading

Machines arrive in Edmonton by deck truck, in containers and by rail, and leave for auctions, dealers and other plants. We unload them, uncrate them and set them in place, or prepare and load outgoing equipment. A lift truck handles most loads; heavier ones come off with skates, a gantry or a crane lift by a licensed partner.

Yellow power unit secured on a lowboy trailer beside a loader at an outdoor site
Heavy units leave site on lowboys

Plant Relocation and Printing Presses

For a plant move we tag every machine, match-mark every connection and move in the order your production team agrees, so part of the plant keeps running. Printing presses and finishing lines are split where your technician chooses, moved unit by unit and set back on a level floor for registration.

Machines wrapped in blue tarps on a trailer during a plant relocation
Wrapped and blocked for the trip to the new plant

or give a call +1-780-652-1812


What Moves the Price in Edmonton

Our minimum job is 3,500 CAD before tax; most industrial jobs cost more. There is no rate card, because no two machines move alike; the written quote follows a site visit or a good set of photos and depends on:

  • The equipment: weight, dimensions and how many pieces
  • Both buildings: docks, doors, floors and overhead obstacles
  • The trip: distance, permits, road bans and escorts
  • The lift method and any crane
  • Installation: levelling, anchoring and millwright work
  • The calendar: shutdowns, nights, weekends and storage

More on how we quote: prices and the 3,500 CAD minimum.


Areas We Cover around Edmonton

Edmonton and the Capital Region: Nisku and Leduc, Acheson, Spruce Grove and Stony Plain, St. Albert, Sherwood Park and Strathcona County, and Fort Saskatchewan and the Industrial Heartland. Longer moves reach Red Deer, Wetaskiwin and Camrose.

Moving between Edmonton and Calgary? See machinery movers in Calgary.


Why Capital Region Plants Hire Us

  • Industrial only: machines and plant equipment, not houses, offices or oilfield rigs.
  • One accountable crew: rigging, hauling, setting, levelling and installation.
  • Methods for older buildings: skates, gantries and jack-and-roll, with crane lifts through licensed partners.
  • Shutdown-friendly scheduling to keep downtime short.
  • Permits and road bans managed: TRAVIS permits, county bans and winter planning.
  • Quick replies: quotes usually within 2–4 working hours once we have all the details.
  • Equipment: jack-and-roll systems for loads up to 600 tons, hydraulic gantries, lift trucks up to 60,000 lb and float trailers for loads up to 50 tons.
  • Insured: $5 million in liability insurance that includes cargo coverage, plus workers’ compensation coverage (WCB-Alberta in Alberta). Certificate of insurance and WCB-Alberta clearance letter on request.

Have These Ready for an Exact Quote

Your quote request gets a firmer answer with:

  1. Equipment details: nameplate photos, or make, model, weight and size.
  2. Addresses: both sites, with door, dock and ceiling measurements.
  3. The route inside: stairs, mezzanines, floor ratings and overhead obstacles.
  4. Timing: shutdown dates and the day the machine must run again.
  5. Installation needs: levelling, anchoring or millwright work.
  6. Site requirements: WCB-Alberta clearance letter, insurance certificate, orientation or union labour.

Other Services in Edmonton

More services for Edmonton plants (every service is listed on our Edmonton page):

  1. Industrial rigging services in Edmonton
  2. Forklift transport and moving in Edmonton
  3. CNC machine movers in Edmonton
  4. Lab and medical equipment movers in Edmonton
  5. Machinery movers in Calgary

Location of our sales office:

6005 Gateway Blvd NW, Edmonton, AB T6H 2H3, Canada


Machinery Moving in Edmonton: FAQ

How much does it cost to move heavy machinery in Edmonton?

The minimum is 3,500 CAD before tax, and most industrial moves in Edmonton cost more. We price each job from the weight and size of the equipment, access at both buildings, the trip with its permits and road bans, the lift method and any installation. Photos and the nameplate are usually enough for a written quote.

What is the safest way to move a heavy machine?

Plan before lifting. We confirm the weight, balance point and approved lifting points, check the floor and every opening on the route, then use skates, a hydraulic gantry, jack-and-roll or a crane lift by a licensed partner. The machine travels chained on a suitable trailer and is levelled at the new site.

Do I need a permit to move an oversize machine in Alberta?

Yes, when the load exceeds the legal size or weight. Alberta issues over-dimension permits through its TRAVIS system, which also handles approvals for participating municipalities. We apply once the dimensions are firm and plan the route around bridges, overhead lines and the travel hours on the permit.

How do spring road bans affect heavy moves around Edmonton?

During the thaw, Alberta restricts weights on listed highways, and counties such as Strathcona, Parkland and Leduc post their own road bans. A heavy load bound for a county road in spring may need a lighter configuration, a longer route or a later date, so we check the bans when we schedule.

Can you load and unload machines from trucks, containers or rail?

Yes. We unload equipment arriving by deck truck, container or rail, uncrate it, move it inside and set it in place, and we prepare and load outgoing machines the same way. Lift trucks handle most loads; heavier ones come off with skates, a gantry or a crane lift by a licensed partner.

Can you move a whole plant or production line?

Yes. Every machine is tagged and every connection match-marked, and the move follows an order agreed with your production team, often in phases so part of the plant keeps running. Equipment arrives in installation order and our millwrights level and align it before your trades reconnect.

Do you move printing presses in Edmonton?

Yes. Presses, folders and finishing lines are split at the points your technician chooses, wrapped or crated unit by unit, moved in order and set back on a level floor. Your technician then registers the press and runs the first job.

Do you install and level the machines after the move?

Yes. Our millwrights level each machine, anchor it to the foundation drawings and align couplings and conveyors. Your licensed electricians reconnect power, and your team or the manufacturer’s technician recommissions and recalibrates the machine before it goes back into production.

Do you move oilfield rigs or oilfield equipment?

No. We do not move drilling or service rigs and we do not run oilfield hauling. We do move plant and shop machinery for manufacturers and fabricators in the Capital Region, including companies that build equipment for the energy sector, inside and between their buildings.

Which areas around Edmonton do you serve?

Edmonton and the Capital Region: Nisku and Leduc, Acheson, Spruce Grove and Stony Plain, St. Albert, Sherwood Park and Strathcona County, and Fort Saskatchewan and the Industrial Heartland. Moves to Red Deer, Wetaskiwin, Camrose and Calgary are quoted with the distance.

or give a call +1-780-652-1812