
Rigging-Busters provides industrial rigging services in Calgary and southern Alberta. Our riggers take on the loads that need more than a lift truck: machines going onto a mezzanine or a roof, transformers headed for an electrical room, tanks that must be upended, and equipment that has to come out through a wall.
Our customers are manufacturers, food plants, aerospace and electronics shops, hospitals and labs, data centres, mechanical and electrical contractors, and equipment dealers across the Calgary region.
- Industrial rigging only: plants and sites, never household moves, oilfield rig moves or crane hire on its own.
- One crew, one quote: rigging, lifting, transport, set-in-place and installation.
- Answers usually within 2–4 working hours on quote requests, once we have all the details.
- Minimum job: 3,500 CAD before tax. Most rigging jobs cost more, and your written quote shows the full price.
- Service area: Calgary, Airdrie, Balzac and Rocky View County, Chestermere, Cochrane and Okotoks.
or give a call +1-587-885-6197

On a rigging job, the drawing board does most of the work. Weight and centre of gravity, sling angles, the rated capacity of each piece of hardware, the bearing under every jack and outrigger: once those numbers are right and written down, the lift is slow, quiet and predictable.
Rigging Work We Do around Calgary
- Machines in and out of buildings, including through dock doors, windows and temporary wall openings
- Rooftop and mezzanine lifts for process equipment and HVAC units
- Tandem lifts with two cranes, or a crane and a gantry, for long or off-balance loads
- Upending and turning vessels, tanks, moulds and dies
- Heavy-haul loading: securing loads on lowboys and float trailers
- Setting and installation: placing on the marks, levelling and anchoring
- Dismantling old equipment before a new line goes in
From Survey to Hand-Over
- Survey of the load, the route and both landing points.
- Written lift plan with weights, rigging, equipment, crew and sequence.
- Approvals: your site rules, plus street-use permits from the City of Calgary when a crane stands on the road.
- Rigging and a short test lift before the load travels.
- The move by gantry, jacks, skates or crane.
- Setting, levelling and anchoring where the drawings call for it.
- Hand-over to your trades and your team.

Cranes and Crane Operators in Alberta
When a load has to fly, a licensed crane partner joins the job and we run the lift as part of the rigging work; we don’t rent cranes out on their own. In Alberta, mobile crane, boom truck and tower crane operation are compulsory certification trades: the operator must hold a journeyperson certificate or be a registered apprentice working under the trade’s rules. We agree the crane position, outrigger loads and swing area with the operator before lift day.
What We Rig With
- Hydraulic gantries sized to the lift
- Jack-and-roll systems and toe jacks for heavy bases
- Machinery skates for the horizontal part of the move
- Spreader bars, slings, shackles and chain hoists, rated for each load
- Crane lifts through licensed partners when the load must go over or up
or give a call +1-587-885-6197
Transformers, Switchgear and Generators
Electrical equipment is compact, heavy and top-heavy, and most units must stay upright. We rig transformers, switchgear, generators and UPS units off the truck, jack them onto skates, roll them into the electrical room or onto the pad and set them on the marks your electrical contractor gives us. Oil handling, testing and connection stay with the manufacturer or your licensed electrical contractor.
Substation upgrades, new data centres in Calgary and Rocky View County, and hospital and lab projects keep this kind of equipment moving in the region. (Market context only: not our projects.)


Rigging Cost in Calgary
We price rigging by the job, not by the hour. Our minimum job is 3,500 CAD before tax, and most rigging jobs cost more. The quote reflects:
- The load: weight, size, centre of gravity and sensitivity
- The lift: height, reach, and gantry, crane or tandem
- The site: access, floors and ground, overhead lines and street use
- Engineering: lift plans, and stamped drawings where a site requires them
- Timing: nights, weekends and shutdown windows
See prices and the 3,500 CAD minimum for how we quote.
Where We Rig
Across Calgary’s industrial districts, including Foothills, Shepard, Nose Creek, Starfield and the airport area, and in Balzac, Rocky View County, Airdrie, Chestermere, Cochrane and Okotoks. Need the whole machine moved, not only lifted? See machinery movers in Calgary. In the Edmonton region, see industrial rigging services in Edmonton.
Why Calgary Sites Use Our Riggers
- Rigging is the core of the job: heavy, awkward and valuable loads, not furniture or rigs.
- The same crew rigs, moves, sets and levels.
- Gantries, jacks, skates and crane lifts through licensed partners.
- Planned around production so downtime stays short.
- Quick replies: quotes usually within 2–4 working hours once we have all the details.
- Equipment: jack-and-roll systems for loads up to 600 tons, hydraulic gantries, lift trucks up to 60,000 lb and float trailers for loads up to 50 tons.
- Insured: $5 million in liability insurance that includes cargo coverage, plus workers’ compensation coverage (WCB-Alberta in Alberta). Certificate of insurance and WCB-Alberta clearance letter on request.
Have These Ready for a Rigging Quote
Send these with your quote request:
- The load: what it is, weight, size, photos or drawings.
- The path: from where to where, heights, distances, obstacles.
- Access: doors, floors, ground and room for a crane.
- Dates: the shutdown window or the delivery day.
- Site rules: WCB-Alberta clearance letter, insurance certificate, orientation, permits or union requirements.
Other Services in Calgary
More services for Calgary plants (every service is listed on our Calgary page):
- Machinery movers in Calgary
- Forklift transport and moving in Calgary
- Industrial rigging services in Edmonton
Location of our sales office:
6707 Elbow Dr SW, Calgary, AB T2V 0E5, Canada
Industrial Rigging in Calgary: FAQ
It plans and performs lifts and moves of heavy equipment such as machines, tanks, transformers and structural pieces. The riggers calculate weights and rigging, choose gantries, jacks, skates or a crane, move the load and set it on its final marks. Rigging-Busters also levels and installs equipment after the lift.
We quote per job rather than per hour, and our minimum job is 3,500 CAD before tax. The price depends on the load, the height and reach of the lift, site access, whether a crane is needed and the timing. Send photos or drawings with your request and we reply with a written quote.
Hydraulic gantries, jack-and-roll systems, toe jacks, machinery skates, spreader bars, slings, shackles and chain hoists, each rated for the load. When the load has to be lifted from above, a licensed crane partner brings the crane and we run the lift as part of the rigging job.
Yes. Mobile crane, boom truck and tower crane operation are compulsory certification trades in Alberta, so an operator must hold a journeyperson certificate or be a registered apprentice working within the trade rules. Our crane partners supply operators who meet these requirements, and we plan each lift with them.
Yes. Every rigging job has a written plan with the weight, centre of gravity, rigging, equipment, crew and order of the lift. Tandem lifts and lifts near people or live equipment get extra detail. If your site needs an engineered or stamped lift plan, mention it in your quote request.
Yes. We rig transformers, switchgear, generators and UPS units off the truck, jack them onto skates and roll them into the electrical room or onto the pad, then set them on the marks your electrical contractor gives us. Oil handling, testing and connection stay with the manufacturer or your electrician.
Yes. Rooftop and mezzanine lifts are usually done by crane through a licensed partner, with a written plan, a street-use permit when the crane stands on a City of Calgary road and a lift time agreed with your site. Smaller loads can go up with a gantry or a material lift indoors.
No. We do not move drilling or service rigs and we do not haul oilfield equipment. We do rig and move plant equipment for manufacturers and fabricators, including shops that build equipment for the energy sector, inside their buildings and between their plants.
Yes. Many rigging jobs run during shutdowns, nights or weekends so production keeps going. Give us your window in the quote request; we plan crew and equipment around it, and the quote shows any cost for off-hours work.
All of Calgary, including Foothills, Shepard, Nose Creek, Starfield and the airport area, plus Balzac and Rocky View County, Airdrie, Chestermere, Cochrane and Okotoks. Jobs in Red Deer, Lethbridge and Edmonton are quoted with travel included.
