Large white imaging magnet strapped on a multi-axle modular trailer in a parking lot

Rigging-Busters handles the heavy side of lab and medical moves in Edmonton and the Capital Region. Our lab and medical equipment movers rig and relocate imaging magnets and scanners, -80 °C freezers, biosafety cabinets, autoclaves and sterilizers, environmental chambers and heavy research or production equipment for hospitals, universities, research labs and pharmaceutical plants.

Packing benches, samples and the cold chain is a job for specialist lab movers. Ours starts where a unit is too heavy, too tall or too built-in for a dolly, and we fit our days to theirs, the manufacturer’s and your facility team’s.

  • Heavy equipment only: lab, hospital and pharmaceutical units, not office furniture or home medical equipment.
  • One crew, one quote: rigging, transport, set-in-place and levelling.
  • Answers usually within 2–4 working hours on quote requests, once we have all the details.
  • Minimum job: 3,500 CAD before tax. Most lab and hospital moves cost more, and your written quote shows the full price.
  • Service area: Edmonton, St. Albert, Sherwood Park, Leduc and the rest of the Capital Region.

or give a call +1-780-652-1812

Imaging magnet in a pink protective cover on a red rigging skid, with two workers
Protected and blocked before the magnet moves

In a hospital, the route matters as much as the load. Corridors serve patients, elevators have weight limits, floors carry rating plates and infection control decides where we can go and when. We map the route with your facility team, protect every surface on it and move inside the hours the building gives us.


Equipment We Move for Edmonton Labs and Hospitals

  • Imaging: MRI magnets, CT and PET scanners and their cabinets, rigged with the vendor’s engineers
  • Cold storage: -80 °C and -20 °C freezers, cryogenic storage and walk-in units
  • Containment and sterilizing: biosafety cabinets, fume hoods, autoclaves and washer-disinfectors
  • Research and production: environmental chambers, bioreactors, centrifuges and heavy instruments
  • Building equipment for clinical areas: transformers, UPS units and switchgear (see machinery movers in Edmonton)

How a Lab Relocation Splits the Work

Specialist lab movers pack instruments and samples, run the cold chain and set benches. We take the heavy units: freezers, cabinets, autoclaves and instruments that need rigging. Both teams work from one schedule with the manufacturer’s engineers and your facility team, so nothing waits on anything else.

Imaging scanner with its covers removed inside a hospital room
Scanners are opened up by the vendor before rigging

MRI and CT Scanners

The vendor’s engineers ramp down and prepare the magnet or scanner; we rig it out, move it on skates or a modular trailer and bring the replacement in along the planned route. Where the only way in is through an exterior wall, a licensed crane partner lifts it to the opening. Shielding, cryogens and calibration stay with the vendor.

Orange mobile crane lifting equipment beside a hospital building
Some imaging equipment enters through a wall opening by crane

Freezers, Cabinets and Autoclaves

Each unit is emptied and decontaminated by your lab team first. Freezers stay upright and move slowly so the compressor oil stays in place; biosafety cabinets travel with the sash and seals protected; autoclaves come out of their recesses on skates or a gantry. After we set and level them, your licensed trades reconnect services and your team or the manufacturer recertifies or requalifies.

or give a call +1-780-652-1812


Our Process in Edmonton

  1. Route survey with your facility team: elevators, floors, doors and infection control.
  2. Shared schedule with lab movers, manufacturer’s engineers and trades.
  3. Isolation of power, water, steam and gases by your licensed trades.
  4. Protection of floors, walls and frames; equipment wrapped and blocked.
  5. Rigging and transport by skates, gantry, jack-and-roll or crane, then a suitable trailer.
  6. Placement and levelling on your marks.
  7. Hand-over for reconnection and recommissioning.
Yellow forklift carrying medical equipment down a protected hospital corridor
Protected corridors before anything rolls

Cost of Moving Lab and Medical Equipment in Edmonton

Our minimum job is 3,500 CAD before tax, and most lab and hospital moves cost more. The quote follows the weight and number of units, the route through the building, the hours allowed and the number of visits, any crane lift and permit, and storage between sites. See prices and the 3,500 CAD minimum.


Areas We Cover

Hospitals, universities, research labs and pharmaceutical plants in Edmonton, St. Albert, Sherwood Park and Strathcona County, Leduc and the Capital Region. Lab moves in British Columbia: see lab and medical equipment movers in Vancouver.


Why Edmonton Labs and Hospitals Choose Us

  • Rigging, not packing: we take the heavy units so specialists can focus on the instruments.
  • One crew from rig-out to levelling.
  • Hospital-ready routes: protection, agreed hours and infection control rules.
  • Quick replies: quotes usually within 2–4 working hours once we have all the details.
  • Equipment: jack-and-roll systems for loads up to 600 tons, hydraulic gantries, lift trucks up to 60,000 lb and float trailers for loads up to 50 tons.
  • Insured: $5 million in liability insurance that includes cargo coverage, plus workers’ compensation coverage (WCB-Alberta in Alberta). Certificate of insurance and WCB-Alberta clearance letter on request.
Wooden crates holding lab equipment lined up on pavement outside a building
Crated equipment staged for the truck

Have These Ready for a Lab or Hospital Quote

Your quote request moves faster with:

  1. An equipment list with make, model and weight of each heavy unit.
  2. The route: floors, elevators, doors and any opening to be made.
  3. The other teams: manufacturer’s engineers, lab movers, your trades.
  4. Hours the building allows for the move.
  5. Site rules: infection control, orientation, WCB-Alberta clearance letter or insurance certificate.

Other Services in Edmonton

More services for Edmonton labs, hospitals and plants (every service is listed on our Edmonton page):

  1. Machinery movers in Edmonton
  2. Industrial rigging services in Edmonton
  3. Forklift transport and moving in Edmonton
  4. CNC machine movers in Edmonton

Location of our sales office:

6005 Gateway Blvd NW, Edmonton, AB T6H 2H3, Canada


Lab and Medical Equipment Moving in Edmonton: FAQ

Which lab and medical equipment do you move?

The heavy units: imaging magnets and scanners, -80 °C freezers, cryogenic storage, biosafety cabinets, fume hoods, autoclaves, washer-disinfectors, environmental chambers, bioreactors and other equipment that needs skates, a gantry, jack-and-roll or a crane lift. Packing, samples and the cold chain belong to specialist lab movers.

Can you relocate a whole laboratory in Edmonton?

We relocate the heavy equipment within the lab move. Specialist lab movers pack instruments, samples and benches, while we rig, move, set and level the freezers, cabinets, autoclaves and heavy instruments, working from one schedule with the lab movers, the manufacturer and your facility team.

Do you move NMR spectrometers or electron microscopes?

No. Those instruments are moved by their manufacturers and specialist movers. We can move the heavy equipment around them on the same schedule, such as freezers, cabinets, autoclaves and chillers, so the rest of the lab is ready when the specialists finish.

How are -80 °C freezers and biosafety cabinets moved?

After your lab team empties and decontaminates them, freezers travel upright and slowly so the compressor oil stays put, and biosafety cabinets move with the sash and seals protected. We set and level each unit; your trades reconnect it and your team or the manufacturer recertifies it.

Can you move an MRI or CT scanner in an Edmonton hospital?

Yes, as the rigging partner of the vendor’s engineers. They ramp down and prepare the unit; we rig it out and move it on skates or a modular trailer, and bring the new one in along the agreed route, with a crane lift by a licensed partner when it enters through an exterior wall.

How much does a lab or hospital equipment move cost?

Our minimum job is 3,500 CAD before tax, and most lab and hospital moves cost more. The price depends on the weight and number of units, the route, the hours and number of visits, any crane lift and storage. Send the equipment list and we reply with a written quote.

Can you work in a hospital that stays open?

Yes. We agree the route with your facility team, protect floors and walls, follow infection control rules and move during the hours the building allows, often evenings and weekends, keeping corridors open for patients and staff.

Who disconnects and reconnects the equipment?

Your licensed electricians and plumbers isolate and reconnect power, water, steam and gases. Your lab team or the manufacturer empties, decontaminates and later recommissions each unit. We rig, move, set and level in between.

Can you store lab equipment between sites?

Yes. We crate or wrap heavy units and arrange storage while a new lab or clinic is finished. Tell us how long the equipment will wait and any temperature or humidity limits from the manufacturer, and storage is included in the quote.

Do you move office furniture or home medical equipment?

No. We move heavy lab, hospital and pharmaceutical equipment only. Office furniture is a job for a commercial mover, and home medical equipment is usually delivered by its supplier. For an imaging magnet, a freezer bank or an autoclave in the Capital Region, call us.

or give a call +1-780-652-1812