Large orange industrial machine on a steel skid, moved by two forklifts inside a plant

Rigging-Busters moves industrial machinery and heavy equipment for plants in Vancouver and across the Lower Mainland, from Burnaby and Richmond to Surrey, Delta and Langley. Our machinery movers and riggers take a machine out of one building and set it to work in the next: rigging, skidding, loading, transport with permits, set-in-place and levelling, for a single press or a whole production line.

Manufacturers, food and beverage plants, print shops, fabricators, labs and equipment dealers call us when a machine is too heavy, too tall or too valuable for a forklift and a flatbed alone.

  • Industrial work only: plant, shop and warehouse equipment across Metro Vancouver, never household or office moves.
  • One crew, one quote: rigging, trucking, set-in-place, levelling and millwright installation.
  • Answers usually within 2–4 working hours on quote requests, once we have all the details.
  • Minimum job: 3,500 CAD before tax. Most industrial jobs cost more, and your written quote shows the full price.
  • Service area: Vancouver, Burnaby, Richmond, Surrey, Delta, Coquitlam and Langley, the Fraser Valley, and on request Vancouver Island and the Okanagan.

Need a rough number first? Try the Heavy Lifting & Moving Calculator for a Vancouver move.

or give a call +1-778-650-5544

Large white machining centre enclosure on machinery skates inside a shop

A machine move is engineering first and trucking second. Before anything rolls, we want the weight, the centre of gravity and the lifting points, the floor rating along the route and the clearance at every door. Those numbers decide the method: skates for a level roll-out, a hydraulic gantry where the building has no overhead crane, jack-and-roll for the heaviest bases, or a crane lift by a licensed partner when the machine must go over a wall.

The right method keeps your floor, your door frames and your schedule intact.


How We Move Heavy Machinery in Vancouver

Every Vancouver job runs through the same seven steps, whether it is one lathe across Burnaby or a line moving from Richmond to Surrey:

  1. Site survey: we walk both buildings, measure doors, aisles and ceiling heights, check floor loads and look at where the truck can stand.
  2. Lift and move plan: weight, centre of gravity, rigging points, equipment and crew are written down before the job starts.
  3. Disconnection: your licensed electricians and plumbers isolate power, air and water; your team or the manufacturer locks the moving parts.
  4. Rigging out: skates, a gantry or jack-and-roll bring the machine to the dock without dragging it across your floor.
  5. Transport: the load is chained to a trailer chosen for its weight and height, with a BC permit when its size calls for one.
  6. Set-in-place: the machine goes onto its new footprint, on the marks you give us.
  7. Installation: levelling, anchoring and alignment, then your trades reconnect and your team or the manufacturer recommissions.
Forklift lifting a machine onto a low flatbed trailer inside a building
Loading inside the building keeps the machine out of the rain
Engine lathe hanging from yellow lifting slings on the forks of an orange forklift
An engine lathe rigged with slings for a short lift

Equipment Our Crew Uses

  • Machinery skates and dollies to roll a machine through narrow aisles and dock doors
  • Hydraulic gantries for lifts inside buildings without an overhead crane
  • Jack-and-roll systems to raise very heavy bases onto skates or cribbing
  • Heavy-capacity lift trucks for loading, unloading and short moves across a yard
  • Float, lowboy and flatbed trailers matched to the weight and height of each load
  • Crane lifts by licensed partners when a machine has to go over a wall or onto a roof, always as part of a rigging job

Transport and Permits in British Columbia

Loads wider, longer, taller or heavier than the legal limits need a commercial transport permit. In British Columbia it comes through the province’s online systems, onRouteBC or Commercial Vehicle Permits Online, or from the Provincial Permit Centre; city streets in Vancouver, Burnaby or Surrey can need their own approval. We apply as soon as the dimensions are known, so the permit never sets your date.

Outside Greater Vancouver and Greater Victoria, commercial drivers must carry chains or traction devices from 1 October to 30 April, and the heavier trucks steel chains on most major highways. A machine going to the Fraser Canyon, the Coquihalla or the Island is planned with that in mind.

Millwright Installation and Levelling

Once the machine stands on its new footprint, our millwrights level it, anchor it where the drawings call for anchors and align shafts, couplings and conveyors to the next machine in the line. Your licensed electricians reconnect power, and your team or the manufacturer’s technician recommissions and recalibrates before production restarts.

Long white equipment enclosure carried across a yard by a large yellow lift truck
Long enclosures travel on a heavy-capacity lift truck
Roll-converting machine sitting on machinery skates in a warehouse
A converting machine on skates, ready to roll out

or give a call +1-778-650-5544


Machines We Move: CNC, Presses, Production Lines

Our Vancouver crews move most of what a Lower Mainland plant runs on:

Industrial Areas We Know Well

Most of the region’s heavy plants sit in a handful of industrial districts: Port Kells and Campbell Heights in Surrey, Annacis Island and Tilbury in Delta, Big Bend in Burnaby and Bridgeport in Richmond, plus the yards along the Fraser in Coquitlam, Port Coquitlam and Langley. Each has its own mix of tilt-up warehouses, older multi-level shops and tight docks, and we plan the rig-out around the building you actually have.

Loading and Unloading

Many moves are only one end of the job: a machine arriving in a container through the Port of Vancouver, a used press bought at an auction in Langley, or a new line delivered on flatbeds to a building with no crane. We unload it, uncrate it, move it inside and set it in place, or the reverse when equipment leaves your plant. A lift truck handles most loads; heavier or awkward pieces come off with skates, a gantry or a crane lift by a licensed partner.

Red forklift next to a flatbed trailer carrying a white CNC machine outdoors
Unloading a CNC machine from a flatbed
Mobile crane lifting a large blue machine off a flatbed trailer while a rigger guides it
Some machines come off the truck by crane

Plant Relocation and Production Line Moves

A plant move is a sequence, not a single trip. We tag every machine, match-mark every connection and agree an order with your production team, so that one part of the line keeps running while another moves. Machines travel wrapped and blocked, arrive in the order they will be installed, and go down on the floor plan you approved. Closures work the same way in reverse, with equipment sent to buyers, storage or a new site.

Orange hydraulic gantry lifting a machine frame inside a factory
A hydraulic gantry does the lifting where there is no overhead crane
Trucks loaded with machines wrapped in white plastic, lined up for a plant move
Wrapped machines lined up for a plant move

Printing Press Moving

Offset, flexographic, digital and screen presses are long, heavy and sensitive to twist. We split a press at the points your technician chooses, crate or wrap each unit, move the units in order and set them back on a levelled floor so the technician can register and run the press again. Folders, cutters, stackers and finishing lines move with them.

Printing press unit lifted on a hydraulic jack in a print plant
A press unit raised for the move
Printing press section strapped down on a flatbed trailer
Press sections travel strapped down and covered

or give a call +1-778-650-5544


Machinery Moving Cost in Vancouver: What Affects the Price

Our minimum job in Vancouver is 3,500 CAD before tax, and most industrial moves cost more. No two machines move the same way, so there is no fixed price list; your written quote shows the full price after a site visit or a good set of photos. These are the things that move the number:

  • Weight and size of each machine, and how many machines move
  • Access at both ends: dock height, door widths, stairs, mezzanines and floor loads
  • Distance and route, including bridges, tunnels and permit conditions
  • The method: skates, a gantry, jack-and-roll or a crane lift
  • Installation: levelling, anchoring, alignment and millwright work
  • Timing: night, weekend or shutdown work, and storage between moves

See prices and the 3,500 CAD minimum for how we quote.


Areas We Cover in Metro Vancouver

We work across Vancouver, from the waterfront and False Creek Flats to the industrial land along the Fraser, and in every Lower Mainland city: Burnaby, Richmond, Delta, Surrey, New Westminster, Coquitlam, Port Coquitlam, Port Moody, North Vancouver, Langley, Maple Ridge and Pitt Meadows. In the Fraser Valley we cover Abbotsford, Mission and Chilliwack.

Moving further? We plan machinery moves to Victoria and Vancouver Island, where every load crosses by ferry or barge, and to Kelowna and the Okanagan over the mountain passes.


Why Lower Mainland Plants Hire Us

  • Industrial only: machines, lines and plant equipment, never furniture or households.
  • The same crew from start to finish: it rigs, hauls, sets, levels and installs.
  • Methods for tight buildings: skates, gantries and jack-and-roll, with crane lifts by licensed partners.
  • Your shutdown sets the plan: moves are scheduled around production to keep downtime short.
  • Permits and routes handled: BC oversize permits, city approvals and winter chain rules outside the city.
  • Quick replies: quotes usually within 2–4 working hours once we have all the details.
  • Equipment: jack-and-roll systems for loads up to 600 tons, hydraulic gantries, lift trucks up to 60,000 lb and float trailers for loads up to 50 tons.
  • Insured: $5 million in liability insurance that includes cargo coverage, plus workers’ compensation coverage (WorkSafeBC in British Columbia). Certificate of insurance and WorkSafeBC clearance letter on request.
Two riggers in high-visibility vests moving a tall electrical cabinet on machinery skates
A tall cabinet on skates needs two riggers and a slow pace
Worker preparing a large-format printer on a wooden skid for transport
Wide-format printers are skidded before they travel

Have These Ready for an Exact Quote

Six answers make a Vancouver quote faster and firmer. Send them with your quote request:

  1. The machine: make, model, weight and size, or photos that show the nameplate.
  2. Both addresses: with dock, door and ceiling sizes at each end.
  3. Access: stairs, mezzanines, floor loads and anything overhead.
  4. Dates: your shutdown window and any fixed delivery date.
  5. Installation: whether the machine needs levelling, anchoring or millwright work.
  6. Site rules: WorkSafeBC clearance letter, insurance certificate, orientation or union requirements.

Other Services in Vancouver

More services for Vancouver plants (every service is listed on our Vancouver page):

  1. Industrial rigging services in Vancouver
  2. Forklift transport and moving in Vancouver
  3. CNC machine movers in Vancouver
  4. Lab and medical equipment movers in Vancouver
  5. Machinery movers in Victoria and on Vancouver Island
  6. Machinery movers in Kelowna and the Okanagan

Location of our sales office:

1892 W Broadway, Vancouver, BC V6J 1Y9, Canada


Machinery Moving in Vancouver: FAQ

How much does it cost to move heavy machinery in Vancouver?

Our minimum job in Vancouver is 3,500 CAD before tax, and most industrial moves cost more. The price depends on the weight and size of the machine, access at both buildings, the distance, any permits and whether we install and level it. Send photos and the nameplate and we quote the full price in writing.

How do you move heavy machinery safely?

We start with the weight, the centre of gravity, the lifting points and the floor ratings along the route. Then we choose the method: skates for a level roll-out, a hydraulic gantry where there is no overhead crane, jack-and-roll for very heavy bases, or a crane lift by a licensed partner. The machine is chained down for transport and levelled on arrival.

Do I need a permit to move an oversize machine in British Columbia?

Yes, when the load is wider, longer, taller or heavier than the legal limits. Commercial transport permits come through onRouteBC or the Provincial Permit Centre, and city streets can need their own approval. We work out the dimensions, apply early and plan the route so the permit fits your date.

Can you load and unload machines at our dock or from a container?

Yes. We unload machines from flatbeds, lowboys and shipping containers, uncrate them, move them inside and set them in place, and we load outgoing equipment the same way. A lift truck handles most pieces; heavier or awkward ones come off with skates, a gantry or a crane lift by a licensed partner.

Can you relocate a whole production line or plant?

Yes. We tag each machine, match-mark the connections and move the line in an agreed order, often in phases so part of production keeps running. Machines arrive in installation order and go down on your new floor plan, where our millwrights level and align them before your trades reconnect.

Do you move printing presses?

Yes. Offset, flexographic, digital and screen presses are split at the points your technician chooses, wrapped or crated unit by unit, moved in order and set back on a level floor. Your technician then registers the press. Folders, cutters and finishing equipment move in the same job.

Do you install and level machines after the move?

Yes. Our millwrights level the machine, anchor it where the drawings call for anchors and align couplings and conveyors. Your licensed electricians reconnect power, and your team or the manufacturer’s technician recommissions and recalibrates the machine before it goes back into production.

Do you move machines to Vancouver Island and the Okanagan?

Yes. Island moves cross by commercial ferry or barge, and oversized loads must be booked ahead, so we plan the sailing with the move. Okanagan moves cross the mountain passes, where winter chain rules apply from 1 October to 30 April. Travel and ferry costs are quoted with the job.

What documents can you provide before work starts?

We provide a certificate of insurance and a WorkSafeBC clearance letter on request, and a written lift or move plan for the job. If your site needs an orientation, a safe work permit or union labour, tell us with the quote request and we include it in the plan and the price.

Do you move household furniture or office equipment?

No. We move industrial machinery and plant equipment only: CNC machines, presses, production lines, compressors, transformers and similar heavy equipment. For a home or office move, please call a household or commercial moving company. For a machine, a line or a plant anywhere in the Lower Mainland, we are the crew to call.

or give a call +1-778-650-5544