
Rigging-Busters provides industrial rigging services in Vancouver and the Lower Mainland. Our riggers lift, lower, turn and position the loads a lift truck can’t handle alone: heavy machines, tanks and vessels, transformers and switchgear, structural pieces and equipment that has to go onto a roof, into a basement or through a wall.
We rig for manufacturers, food and beverage plants, labs and hospitals, data centres, electrical and mechanical contractors and equipment dealers, inside running plants and on open sites.
- Industrial rigging only: plant, site and equipment work across Metro Vancouver, never household moves or crane hire on its own.
- One crew, one quote: rigging, lifting, transport, set-in-place and millwright installation.
- Answers usually within 2–4 working hours on quote requests, once we have all the details.
- Minimum job: 3,500 CAD before tax. Most rigging jobs cost more, and your written quote shows the full price.
- Service area: Vancouver, Burnaby, Richmond, Surrey, Delta, Coquitlam and Langley, and the Fraser Valley.
or give a call +1-778-650-5544

Good rigging is mostly arithmetic done before the lift. We work out the weight and centre of gravity, the sling angles and the rated capacity of every sling, shackle and spreader, the ground or floor bearing under each outrigger and jack, and the path the load will take. The lift itself should then be the quietest part of the day.
What Our Riggers Do in Vancouver
- Machine rigging into and out of buildings, across shop floors and through dock doors
- Lifts onto roofs, mezzanines and platforms, and down into pits and basements
- Tandem lifts with two cranes or a crane and a gantry, for long or unbalanced loads
- Upending and turning tanks, vessels, moulds and dies
- Loading for heavy haul: securing machines and structures on lowboys and float trailers
- Setting and installation: placing equipment on its marks, levelling and anchoring
- Dismantling and removal of old equipment before a new line goes in
How a Rigging Job Runs
- Survey: we see the load, the route and both landing spots, and measure what the drawings miss.
- Lift plan: weights, rigging, equipment, crew and the sequence of the lift are written down and shared with your team.
- Approvals: your site rules, permits for street use where a crane stands on the road, and a time slot that suits your production.
- Rigging: slings, spreaders and attachments go on, and the load is test-lifted a few centimetres before it travels.
- The move: the load travels by gantry, jacks, skates or crane to its new position.
- Setting: it goes down on its marks, is levelled and, where the drawings call for it, anchored.
- Hand-over: your trades reconnect and your team signs off the job.

Rigging Equipment We Bring
- Hydraulic gantries for lifts inside buildings without an overhead crane
- Jack-and-roll systems and hydraulic toe jacks to raise heavy bases off the floor
- Machinery skates to roll loads across floors and ramps
- Spreader bars, slings, shackles and chain hoists, each rated for the load
- Crane lifts through licensed crane partners when the load has to fly

Crane Lifts and Crane Operators in British Columbia
When a load must go over a wall, onto a roof or off a truck in one piece, we bring a crane in through a licensed crane partner and run the lift as part of the rigging job; we don’t rent out cranes on their own. In British Columbia, operators of mobile cranes, boom trucks and tower cranes need a certificate acceptable to WorkSafeBC, administered by BC Crane Safety, and operators qualified in another province register there to have their certificates verified. We plan crane position, outrigger loads and swing radius with the operator before the lift day.
or give a call +1-778-650-5544
Transformer and Switchgear Moving
Transformers, switchgear, generators and UPS units are short, dense and top-heavy, and most must stay upright the whole way. We rig them off the truck, jack them onto skates, roll them into the electrical room or onto their pad and set them on the marks your electrical contractor gives us. Draining, filling and testing stay with the manufacturer or your electrical contractor.
Electrical work in the region keeps heavy equipment on the move: BC Hydro is expanding its McLellan substation in Langley, with a first phase due in 2026, and plans new substations in Langley, Willoughby and Surrey by 2032. Data centres in Vancouver and Burnaby add their own generators and switchgear. (Market context only: these are not our projects.)


Where We Rig
Plants and sites across Vancouver and the Lower Mainland: the industrial land along the Fraser, Annacis Island and Tilbury in Delta, Port Kells and Campbell Heights in Surrey, Big Bend in Burnaby, Bridgeport in Richmond, and the business parks of Coquitlam, Port Coquitlam and Langley. We also rig in the Fraser Valley, from Abbotsford to Chilliwack.
Moving a whole machine rather than lifting it? See machinery movers in Vancouver.
Rigging Cost in Vancouver
We quote rigging per job, not per hour, and our minimum job is 3,500 CAD before tax. Most rigging jobs cost more. What moves the price:
- The load: weight, size, centre of gravity and how fragile it is
- The lift: height, reach and whether it needs a crane, two cranes or a gantry
- The site: access, floor and ground conditions, overhead lines and street use
- Engineering: lift plans, and engineered drawings where a site asks for them
- Timing: nights, weekends and shutdown windows
See prices and the 3,500 CAD minimum for how we quote.
Why Vancouver Sites Hire Our Riggers
- Rigging is our core work: heavy and awkward loads in plants and on sites, not furniture.
- One crew from rig to set: the same people rig, move, set, level and install.
- Several ways to lift: gantries, jacks, skates and crane lifts through licensed partners.
- Planned around production: lifts scheduled to keep your downtime short.
- Quick replies: quotes usually within 2–4 working hours once we have all the details.
- Equipment: jack-and-roll systems for loads up to 600 tons, hydraulic gantries, lift trucks up to 60,000 lb and float trailers for loads up to 50 tons.
- Insured: $5 million in liability insurance that includes cargo coverage, plus workers’ compensation coverage (WorkSafeBC in British Columbia). Certificate of insurance and WorkSafeBC clearance letter on request.

Have These Ready for a Rigging Quote
Five answers get you a faster, firmer quote. Send them with your quote request:
- The load: what it is, its weight and size, and photos or drawings.
- Where it goes: from where to where, with heights, distances and obstacles.
- Access: doors, floors, ground conditions and room for a crane if one is needed.
- Dates: your shutdown window or the day the load arrives.
- Site rules: WorkSafeBC clearance letter, insurance certificate, orientation, permits or union requirements.
Other Services in Vancouver
More services for Vancouver plants (every service is listed on our Vancouver page):
- Machinery movers in Vancouver
- Forklift transport and moving in Vancouver
- CNC machine movers in Vancouver
- Lab and medical equipment movers in Vancouver
Location of our sales office:
1892 W Broadway, Vancouver, BC V6J 1Y9, Canada
Industrial Rigging in Vancouver: FAQ
An industrial rigging company plans and carries out lifts and moves of heavy equipment: machines, tanks, transformers and structural pieces. The crew calculates weights and rigging, chooses gantries, jacks, skates or a crane, moves the load safely and sets it in its final position. Many riggers, including Rigging-Busters, also install and level the equipment.
We quote rigging per job rather than per hour, and our minimum job is 3,500 CAD before tax. The price depends on the weight and size of the load, the height and reach of the lift, site access, whether a crane is needed and the timing. Send photos or drawings and we reply with a written quote.
Hydraulic gantries, jack-and-roll systems, hydraulic toe jacks, machinery skates, spreader bars, slings, shackles and chain hoists, each rated for the load. When a load must be lifted from above, we bring in a crane through a licensed crane partner and run the lift as part of the rigging job.
Yes. Operators of mobile cranes, boom trucks and tower cranes in British Columbia need a certificate acceptable to WorkSafeBC, administered by BC Crane Safety. Operators qualified in another province register with BC Crane Safety to have their certificates verified. Our crane partners supply operators who meet these rules.
Yes. Every rigging job starts with a written plan that lists the weight, centre of gravity, rigging, equipment, crew and the order of the lift. Tandem lifts and lifts near people or live equipment get extra detail. If your site needs an engineered lift plan, tell us with the quote request.
Yes. We rig transformers, switchgear, generators and UPS units off the truck, jack them onto skates, roll them into place and set them on the marks your electrical contractor gives us. Draining, filling, testing and reconnection stay with the manufacturer or your licensed electrical contractor.
Yes. Rooftop units and process equipment go up by crane through a licensed partner, and loads that must go through a narrow door, a window opening or a wall are planned with skates, gantries and sometimes a temporary opening made by your contractor. We measure every opening during the survey.
Yes. Many of our rigging jobs run during shutdowns, nights or weekends so production keeps going. Tell us your window when you ask for a quote; we plan the crew and equipment to fit it, and the quote shows any cost for off-hours work.
We provide a certificate of insurance and a WorkSafeBC clearance letter on request, and a written lift plan for the job. If your site needs an orientation, a safe work permit or union labour, tell us with the quote request so the plan and the price include it.
All of Vancouver and the Lower Mainland, including Burnaby, Richmond, Delta, Surrey, New Westminster, Coquitlam, Port Coquitlam, North Vancouver and Langley, and the Fraser Valley from Abbotsford to Chilliwack. For Vancouver Island and the Okanagan, ask us about travel and ferry costs.
