Machine wrapped in white plastic on a flatbed trailer outdoors, with a worker beside it

Rigging-Busters moves industrial machinery and heavy equipment for Victoria and the rest of Vancouver Island. Our machinery movers and riggers take machines between Island buildings, over to the mainland and back by commercial ferry or barge, and set them in place and level them at the other end, for shops in Saanich and Sidney, plants in Nanaimo and everything between.

On the Island one crew does it all: rigging, forklift work, CNC machines, lab and hospital equipment, plant relocations, loading and unloading, printing presses and transformers.

  • Industrial work only: plant, shop, lab and marine equipment, never household or office moves.
  • One crew, one quote: rigging, trucking, the crossing, set-in-place, levelling and millwright installation.
  • Answers usually within 2–4 working hours on quote requests, once we have all the details.
  • Minimum job: 3,500 CAD before tax, on the Island as on the mainland. The crossing and travel are quoted with the job, and your written quote shows the full price.
  • Service area: Greater Victoria, the Saanich Peninsula, the Westshore, the Cowichan Valley, Nanaimo and up-Island to Courtenay and Campbell River.

or give a call +1-778-650-5544

Forklift loading a large wooden crate onto a lowboy trailer
Crated and loaded for the crossing

Island moves are planned around the water. Everything heavy reaches Vancouver Island by commercial ferry or barge, so the booking, the load’s dimensions and the sailing time decide the date as much as the machine does. We plan the crossing first, then the rigging at both ends.


Getting Heavy Machinery onto Vancouver Island

Commercial carriers take trailers, oversized loads and declared dangerous goods across from the Lower Mainland. On Seaspan Ferries, a load wider than 10 ft 5 in and taller than 2 ft 6 in off the deck counts as oversized, must be booked 24 hours ahead and is loaded and unloaded by the customer; overwidth charges start above 9 ft. BC Ferries also carries commercial vehicles. We book the space, size the trailer to the deck and the clearances, and drain or declare fluids as the carrier requires.

Away from Greater Victoria, Island highways fall under BC’s winter tire and chain rules from 1 October to 30 April, which shapes trips over the Malahat and up to Nanaimo, Courtenay and Campbell River.


How We Move Machinery on the Island

  1. Survey: both sites, doors, floors and the truck approach, on the Island and on the mainland.
  2. Crossing plan: carrier, sailing, dimensions, notice and any dangerous-goods declaration.
  3. Disconnection: your licensed trades isolate services; your team or the manufacturer secures moving parts.
  4. Rig-out and loading: skates, a gantry, jack-and-roll or a crane lift by a licensed partner, then the trailer.
  5. The crossing: chained, wrapped against salt spray and booked on the agreed sailing.
  6. Set-in-place: onto the marks at the new site.
  7. Installation: levelling, anchoring and alignment before your trades reconnect.
Crane lifting a grey machine off a truck into a narrow lane beside a building
Tight lanes in older neighbourhoods often need a crane lift

or give a call +1-778-650-5544


Our Services in Greater Victoria and on the Island

Industrial Rigging

Lifts onto roofs and mezzanines, machines through tight doors in older buildings, tanks and vessels turned and set, and tandem lifts with licensed crane partners. Every lift has a written plan. In BC, mobile crane and boom truck operators need a certificate acceptable to WorkSafeBC, and our crane partners supply operators who hold one.

Forklift Transport and Unloading

Forklifts and warehouse equipment moved between Island sites or across to the mainland, including units that won’t start, and forklift unloading for containers and deck trucks arriving at buildings without a dock.

CNC Machine Moving

Machining centres, lathes and mills prepared from the manufacturer’s manual: control backed up, axes locked, coolant drained. We rig at the approved points, wrap the machine against moisture for the crossing and level it on arrival for the technician. Precision machine shops on the Saanich Peninsula move this way.

Large white machining centre enclosure on machinery skates inside a shop
Machining centres roll on skates under their own frame

Lab and Medical Equipment

The heavy end of lab and hospital moves: imaging magnets with the vendor’s engineers, -80 °C freezers, biosafety cabinets and autoclaves, with routes agreed with your facility team. Specialist lab movers pack instruments and samples; we don’t move NMR spectrometers or electron microscopes.

Plant Relocation and Production Lines

Machines tagged, connections match-marked and moved in an agreed order, often in phases so part of the operation keeps running. Lines moving onto or off the Island are booked sailing by sailing so they arrive in installation order.

Machines wrapped in white plastic waiting in a yard while a red forklift works nearby
Wrapped machines staged for loading

Loading, Unloading and Printing Presses

Machines arriving by container, deck truck or barge are unloaded, uncrated and set in place. Printing presses and finishing lines are split where your technician chooses, moved unit by unit and set back level for registration.

Transformers and Switchgear

Transformers, switchgear and generators rigged off the truck and set on the pad or in the electrical room on your electrical contractor’s marks; testing and connection stay with the manufacturer or your licensed electrician.

Transformer standing on a concrete pad with workers nearby
Set on the electrical contractor’s marks

or give a call +1-778-650-5544


Machinery Moving Cost on Vancouver Island

Our minimum job is 3,500 CAD before tax, the same on the Island as in Vancouver, and most industrial moves cost more. Travel and the crossing are quoted with the job. The price depends on:

  • The equipment: weight, size and number of pieces
  • The crossing: carrier, oversized booking and sailing time
  • Access at both ends: docks, doors, floors and lanes
  • The lift method, including any crane
  • Installation: levelling, anchoring and millwright work
  • Timing: shutdowns, nights, weekends and storage

See prices and the 3,500 CAD minimum for how we quote.


Areas We Cover on Vancouver Island

Greater Victoria, including Victoria, Saanich, Esquimalt, Oak Bay and View Royal; the Saanich Peninsula with Central Saanich, North Saanich and Sidney; the Westshore with Langford and Colwood; the Cowichan Valley and Duncan; Nanaimo; and up-Island to Parksville, Courtenay, Comox and Campbell River. Industrial work clusters in Keating in Central Saanich, Glanford and Enterprise in Saanich, and the airport and Sidney industrial area.

On the mainland, see Rigging-Busters Vancouver and machinery movers in Vancouver.


Why Island Businesses Hire Us

  • Industrial only: machines, lines, lab and marine equipment.
  • The crossing handled: carrier booking, oversized notice and dimensions.
  • One crew for rigging, transport, setting, levelling and installation.
  • Methods for older buildings: skates, gantries, jack-and-roll and crane lifts through licensed partners.
  • Quick replies: quotes usually within 2–4 working hours once we have all the details.
  • Equipment: jack-and-roll systems for loads up to 600 tons, hydraulic gantries, lift trucks up to 60,000 lb and float trailers for loads up to 50 tons.
  • Insured: $5 million in liability insurance that includes cargo coverage, plus workers’ compensation coverage (WorkSafeBC in British Columbia). Certificate of insurance and WorkSafeBC clearance letter on request.

Have These Ready for an Exact Quote

Send these with your quote request:

  1. The equipment: make, model, weight and size, or nameplate photos.
  2. Both addresses, on the Island and on the mainland if the move crosses.
  3. Access: doors, docks, floors, lanes and overhead lines.
  4. Dates: your shutdown window and any fixed delivery date.
  5. Site rules: WorkSafeBC clearance letter, insurance certificate, orientation or union requirements.

Other Services in British Columbia

  1. Rigging-Busters Vancouver: every BC service in one place
  2. Machinery movers in Vancouver
  3. Machinery movers in Kelowna and the Okanagan

Location of our sales office:

1892 W Broadway, Vancouver, BC V6J 1Y9, Canada


Machinery Moving in Victoria and on Vancouver Island: FAQ

How do you get heavy machinery onto Vancouver Island?

By commercial ferry or barge. On Seaspan Ferries, loads wider than 10 ft 5 in and taller than 2 ft 6 in off the deck are oversized, must be booked 24 hours ahead and are loaded by the customer. We book the space, size the trailer, declare any dangerous goods and plan the rigging around the sailing.

How much does it cost to move machinery to or around Vancouver Island?

Our minimum job is 3,500 CAD before tax, the same as on the mainland, and most industrial moves cost more. Travel and the crossing are quoted with the job. The price depends on the equipment, the carrier and sailing, access at both ends, the lift method and installation.

Do you do industrial rigging in Victoria?

Yes. We lift machines onto roofs and mezzanines, bring them through tight doors in older buildings, turn and set tanks and vessels, and run tandem lifts with licensed crane partners. Every lift has a written plan, and crane operators hold the certificate WorkSafeBC requires.

Can you move forklifts, CNC machines and lab equipment on the Island?

Yes. Forklifts move between sites or across to the mainland, running or not. CNC machines are prepared from the manual, wrapped against moisture for the crossing and levelled on arrival. Lab and hospital equipment such as imaging magnets, freezers and autoclaves moves with the vendor and your facility team.

Do you relocate plants and production lines on Vancouver Island?

Yes. Machines are tagged, connections match-marked and the line moves in an agreed order, often in phases so part of the operation keeps running. For moves across the water, we book sailings so equipment arrives in installation order, then our millwrights level and align it.

Do you install and level machines after the move?

Yes. Our millwrights set each machine on its marks, level it, anchor it where the drawings call for it and align couplings and conveyors. Your licensed electricians reconnect power, and your team or the manufacturer recommissions the machine.

Which parts of Vancouver Island do you serve?

Greater Victoria, the Saanich Peninsula and Sidney, the Westshore, the Cowichan Valley, Nanaimo, Parksville, Courtenay, Comox and Campbell River. Industrial work clusters in Keating, Glanford and Enterprise, and the airport and Sidney industrial area.

Do winter road rules affect Island moves?

Outside Greater Victoria, BC requires winter tires or chains on most highways from 1 October to 30 April, and heavier trucks must carry steel chains. Trips over the Malahat or up-Island are planned with that in mind, and sailings can change in bad weather, so we leave room in the schedule.

What documents can you provide before work starts?

We provide a certificate of insurance and a WorkSafeBC clearance letter on request, and a written move or lift plan. If your site needs an orientation, a safe work permit or union labour, tell us with the quote request so the plan and the price include it.

How fast do you reply to a quote request?

Usually within 2–4 working hours once we have the equipment details, both addresses, access and your dates. For moves across the water, include the size of the largest piece so we can check the carrier’s limits straight away.

or give a call +1-778-650-5544