Red forklift next to a flatbed trailer carrying a white CNC machine outdoors

Rigging-Busters moves industrial machinery and heavy equipment for Kelowna and the Okanagan, from West Kelowna and Lake Country to Vernon, Penticton and Summerland. Our machinery movers and riggers move machines inside the valley and in and out of it, over the passes to the Lower Mainland or Alberta, and set them in place and level them at the other end.

In the Okanagan one crew covers everything: rigging, forklift work, CNC machines, lab and hospital equipment, packaging and production lines, loading and unloading, printing presses and transformers.

  • Industrial work only: plant, shop, winery, food and lab equipment, never household or office moves.
  • One crew, one quote: rigging, trucking, set-in-place, levelling and millwright installation.
  • Answers usually within 2–4 working hours on quote requests, once we have all the details.
  • Minimum job: 3,500 CAD before tax, in the Okanagan as in Vancouver. Travel is quoted with the job, and your written quote shows the full price.
  • Service area: Kelowna, West Kelowna, Lake Country, Vernon, Penticton, Summerland and the rest of the Okanagan Valley.

or give a call +1-778-650-5544

Forklift lifting a machine onto a trailer inside a warehouse
Loading under cover before the trip over the passes

Every move into or out of the Okanagan crosses a mountain pass. The Coquihalla, the Okanagan Connector and the routes east to Alberta climb high, and in winter they come with chain rules and closures. We plan the trailer, the route and the date around the pass, then the rigging at both ends.


Moving Heavy Machinery over the Passes

From 1 October to 30 April, BC’s winter tire and chain rules apply on most highways outside Greater Vancouver and Greater Victoria, and trucks over 11,794 kg must carry steel chains on most major routes. That covers every way in and out of the Okanagan. Oversize loads also need a commercial transport permit through onRouteBC or the Provincial Permit Centre, with travel hours and routes set by the permit.

In spring, BC posts load restrictions on particular weakened roads, and Okanagan municipalities can add their own. A heavy machine bound for a side road in March or April may need a lighter trailer or a later date, so we check the notices before booking.


How We Move Machinery in Kelowna

  1. We look at both ends, even when one of them is in Surrey or Calgary.
  2. We pick the road: which pass, which permit, what the season allows and when the truck should leave.
  3. Your trades shut it down: power, air and water isolated; moving parts locked by your team or the maker.
  4. We rig it out with skates, a gantry, jack-and-roll, or a crane lift by a licensed partner.
  5. It travels chained down and covered, on a trailer suited to its size.
  6. It lands on the marks you set at the new building.
  7. We finish it: level, anchor and align, then hand it to your trades.
Yellow forklift working in a yard beside parked trucks
Yard work before the long drive

or give a call +1-778-650-5544


Our Services in Kelowna and the Okanagan

Industrial Rigging

Wineries, breweries and food plants bring us in for fermenters and tanks that must be stood up and set, equipment that has to reach a roof or mezzanine, and machines squeezed through narrow doors. Lifts are written up before the day; when a crane is needed, a licensed partner supplies one with an operator certificated as WorkSafeBC requires.

Forklift Transport and Unloading

Lift trucks and stackers hauled across town, up the valley or out to the coast and Alberta, whether they start or not. When a container lands at a building without a dock, we bring a forklift big enough to empty it.

CNC Machine Moving

Machining centres, lathes, mills and routers prepared from the manufacturer’s manual, with the control backed up and the axes locked. We rig at the approved points, protect the machine for the mountain drive and level it on arrival for the technician.

Large yellow forklift carrying a CNC machining centre across an outdoor yard
A machining centre on the forks of a heavy lift truck

Lab and Medical Equipment

For hospitals, the university campus and research labs, we take the units that need rigging: scanners and magnets alongside the vendor’s engineers, freezers, cabinets and autoclaves. Packing and samples belong to specialist lab movers, and NMR spectrometers and electron microscopes stay with their manufacturers.

Packaging Lines, Plant Relocation and Closures

Food, beverage and winery equipment, fillers, labellers and packaging lines are tagged, match-marked and moved in an agreed order, often in phases so production keeps going. When a line leaves the valley, we plan each truck so equipment arrives in installation order at the new plant.

Crane lifting a large grey cylindrical unit beside a mobile crane on an industrial site
Large process units sometimes come off the truck by crane

Loading, Unloading and Printing Presses

Containers and deck trucks get unloaded and their contents uncrated and placed; machines bought at Okanagan auctions get loaded out on time. Presses and finishing lines come apart where your technician wants, travel unit by unit and go back down level so the press can be registered.

Transformers and Switchgear

Heavy electrical gear comes off the truck by skates, jacks or crane and goes onto its pad or into the electrical room exactly where your electrical contractor marks it. Utility work keeps this equipment moving in the valley: FortisBC is upgrading its Saucier substation in Kelowna. (Market context only: not our project.)

or give a call +1-778-650-5544


Machinery Moving Cost in the Okanagan

Our minimum job is 3,500 CAD before tax, the same in the Okanagan as in Vancouver, and most industrial moves cost more. Travel is quoted with the job. The price depends on:

  • The equipment: weight, size and number of pieces
  • The route: distance, pass, permits and seasonal restrictions
  • Access at both ends: docks, doors and floors
  • The lift method, including any crane
  • Installation: levelling, anchoring and millwright work
  • Timing: harvest and shutdown windows, weekends and storage

See prices and the 3,500 CAD minimum for how we quote.


Areas We Cover in the Okanagan

Kelowna, including the north end, Sexsmith and the airport area; West Kelowna and its industrial land along Kyle Road; Lake Country; Vernon and Coldstream; Peachland, Summerland and Penticton; and the South Okanagan to Oliver and Osoyoos. Moves to and from the Lower Mainland run over the Coquihalla or the Okanagan Connector, and moves to Alberta over the Rogers Pass or the southern routes.

For the coast, see Rigging-Busters Vancouver and machinery movers in Vancouver. For Alberta, see Rigging-Busters Calgary.


Why Okanagan Businesses Hire Us

  • Valley work only means industrial work: wineries, food plants, shops and labs, no households.
  • We drive these passes: permits, chain rules, closures and spring restrictions are part of the plan.
  • The crew that rigs your machine also sets and levels it.
  • The right method for each building: skates, gantries, jack-and-roll, or a licensed crane partner.
  • Quick replies: quotes usually within 2–4 working hours once we have all the details.
  • Equipment: jack-and-roll systems for loads up to 600 tons, hydraulic gantries, lift trucks up to 60,000 lb and float trailers for loads up to 50 tons.
  • Insured: $5 million in liability insurance that includes cargo coverage, plus workers’ compensation coverage (WorkSafeBC in British Columbia). Certificate of insurance and WorkSafeBC clearance letter on request.

Have These Ready for an Exact Quote

Send these with your quote request:

  1. Nameplate photos, or make, model, weight and size of each piece.
  2. Where it comes from and where it goes, even if one end is outside the valley.
  3. How we get in: doors, docks, floor ratings, power lines and trees.
  4. When: harvest and shutdown windows, or the day it must run.
  5. Your site’s paperwork: WorkSafeBC clearance letter, insurance certificate, orientation or union labour.

Other Services in British Columbia

  1. Rigging-Busters Vancouver: every BC service in one place
  2. Machinery movers in Vancouver
  3. Machinery movers in Victoria and on Vancouver Island

Location of our sales office:

1892 W Broadway, Vancouver, BC V6J 1Y9, Canada


Machinery Moving in Kelowna and the Okanagan: FAQ

How much does it cost to move machinery in Kelowna?

Our minimum job is 3,500 CAD before tax, the same as in Vancouver, and most industrial moves cost more. Travel is quoted with the job. The price depends on the equipment, the route and pass, permits and seasonal restrictions, access at both ends, the lift method and installation.

How do you move heavy machinery over the mountain passes in winter?

We plan around BC’s winter rules: from 1 October to 30 April, trucks need winter tires or chains on most highways outside Greater Vancouver and Greater Victoria, and heavier trucks must carry steel chains. We pick the pass and the date with the forecast in mind, and leave room for closures.

Do you do industrial rigging in the Okanagan?

Yes. Wineries, food plants and shops use us to stand up and set tanks and fermenters, to put equipment on roofs and mezzanines and to get machines through narrow doors. Each lift is planned in writing, and when a crane is needed, a licensed partner supplies it with a certificated operator.

Can you move CNC machines, forklifts and lab equipment in Kelowna?

Yes. Machine tools are made ready from the maker’s manual, protected for the mountain drive and levelled again on arrival. Lift trucks travel whether or not they start. For hospitals and labs we rig scanners, freezers and autoclaves alongside the vendor and your facility staff.

Do you relocate packaging, bottling and production lines?

Yes. Fillers, labellers, conveyors and packaging lines are tagged, match-marked and moved in an agreed order, often in phases so production continues. When a line leaves the valley, each truck is planned so the equipment arrives in installation order.

Do you install and level machines after the move?

Yes. Once a machine is on its marks, our millwrights bring it to level, bolt it down where the foundation drawing says so and line up shafts and conveyors with the rest of the line. Power goes back on through your licensed electrician, and start-up belongs to your team or the maker.

Which Okanagan towns do you serve?

Kelowna, West Kelowna, Lake Country, Vernon, Coldstream, Peachland, Summerland, Penticton and the South Okanagan to Oliver and Osoyoos. Moves to the Lower Mainland, Vancouver Island and Alberta are quoted with the distance and any crossing.

Do I need a permit for an oversize load in British Columbia?

Yes, when a load exceeds the legal size or weight. Commercial transport permits come through onRouteBC or the Provincial Permit Centre and set the travel hours and route. We apply as soon as the dimensions are known so the permit fits your date.

What documents can you provide before work starts?

Ask and we send a certificate of insurance and a WorkSafeBC clearance letter, and every job comes with a written plan for the move or lift. Site orientations, safe work permits or union crews are fine too; list them in the request and they go into the plan and the quote.

How fast do you reply to a quote request?

Most requests get an answer within 2–4 working hours, provided they include the equipment, both addresses, how we get in and your dates. If the move crosses a pass, the size and weight of the biggest piece tell us at once which trailer and permit it needs.

or give a call +1-778-650-5544